Valid Physical Security Professional ASIS-PSP Dumps Ensure Your Passing
ASIS-PSP Dumps Real Exam Questions Test Engine Dumps Training
ASIS International, one of the world's largest membership organizations of security professionals, offers a Physical Security Professional (PSP) certification program. This program is designed for individuals working in the physical security field, supplying them with a recognized industry standard credential. The ASIS PSP certification marks professional excellence and distinguishes an individual from peers in the industry.
NEW QUESTION # 96
The common practices in recruiting a jihadist are:
- A. indoctrination
- B. All of the above
- C. training and preparation for the terrorist act
- D. identifying individuals with appropriate ideology
Answer: B
Explanation:
Recruitment into jihadist or other terrorist movements typically involves identifying individuals vulnerable to radical ideology, indoctrinating them through propaganda and religious misinterpretation, and then training them for operational activities, including attacks or support roles.
References:
ASIS POA Manual, Chapter: Radicalization and Recruitment
U.S. Department of Homeland Security - Radicalization Pathways
ASIS PSP Study Guide, Domain 1: Threat Actors
NEW QUESTION # 97
__________ is internationally causing fear of imminent harmful or offensive touching but without touching or physical contact.
- A. Battering
- B. Assault
- C. None of the above
- D. Stabbing
Answer: B
Explanation:
Assault is defined as the intentional act of creating a reasonable apprehension or fear of imminent harmful or offensive contact in another person. It does not require physical contact; the threat alone-if credible and intentional-is sufficient. This differentiates it from battery, which involves actual contact.
Stabbing (B) involves physical harm.
Battering (C) is a form of battery, which requires actual physical contact.
None of the above (D) is incorrect, as assault is the proper term.
References:
ASIS POA Manual - Civil Liability and Torts
PSP Study Guide - Legal Aspects of Physical Security
NEW QUESTION # 98
Which of the following are the four types of lock-down systems?
- A. locks, plates, cables and alarms
- B. cages, plates, cables and alarms
- C. cages, padlock, cables and alarms
- D. cages, plates, bolts and alarms
Answer: B
Explanation:
The four common types of physical lock-down systems for protecting hardware, especially in IT environments, include:
Cages: Enclosures for servers or critical equipment.
Plates: Lock-down plates secured to desks or floors.
Cables: Security cables to tether devices.
Alarms: Motion or tamper-detection systems.
These measures are used to deter theft and unauthorized physical access.
References:
PSP Study Guide - Physical Security of Information Systems
ASIS POA Manual - Equipment Protection Systems
NEW QUESTION # 99
Taking personal property in such a way that the plaintiff's use or right of possession of chattel is restricted is called:
- A. Restriction
- B. Constraint
- C. Conversion
- D. Transfer
Answer: C
NEW QUESTION # 100
A hybrid system is a combination of:
- A. Proprietary & Contract security
- B. Security consultants & services
- C. Standard & Security acts
- D. Security & Control
Answer: A
Explanation:
A hybrid security system combines both proprietary (in-house) and contract security personnel. This model is used by organizations that want to retain control over some security functions while outsourcing others to reduce costs or gain specialized capabilities. For example, an organization may employ proprietary officers for critical access control but use contract guards for patrolling or monitoring.
References:
ASIS PSP Study Guide - Domain 3
Protection of Assets Manual - Security Personnel Structures
NEW QUESTION # 101
The classic triangle frequently referred to in describing the nature of fire consists of:
- A. heat, light, oxygen
- B. heat, fuel, oxygen
- C. heat, carbon dioxide, oxygen
- D. heat, smoke, oxygen
Answer: B
NEW QUESTION # 102
In lens selection, the most important factor in determining the relative magnification of an object is the:
- A. Image device
- B. Focal length
- C. Image format
- D. Lens format
Answer: B
Explanation:
Focal length is the primary factor in determining the magnification and field of view in a camera lens. A longer focal length results in a narrower field of view and greater magnification of distant objects.
Conversely, a shorter focal length gives a wider field of view with less magnification.
A (Image device) and B/C (Lens or image format) influence compatibility and image quality, but do not directly affect magnification.
References:
PSP Study Guide - CCTV and Optical Lens Selection
POA Manual - Video Surveillance System Design
NEW QUESTION # 103
Which of the following is the type of comparative negligence statute?
- A. 50/50 rule
- B. Pure approach
- C. All of the above
- D. 51 percent rule
Answer: C
Explanation:
The three types of comparative negligence statutes include:
Pure approach (A): The plaintiff's compensation is reduced by their percentage of fault, no matter how high.
50/50 rule (B): The plaintiff can recover damages only if their fault is 50% or less.
51 percent rule (C): The plaintiff can recover only if they are less than 51% at fault.
All three are valid comparative negligence models used in different jurisdictions.
References:
ASIS International - Comparative Negligence in Civil Litigation
PSP Study Guide - Legal Liability and Risk Transfer
NEW QUESTION # 104
A device that is designed to respond to a certain change in conditions, such as the opening of a door, movement within a room or rapid rise in heat is known as:
- A. Sounding device
- B. Alarm sensor
- C. Enunciator
- D. Sending device
Answer: B
NEW QUESTION # 105
The operations that are 'in-house', or controlled entirely by the company establishing security for its operations is called:
- A. Control operations
- B. Contract security operations
- C. Staffing operations
- D. Proprietary security operations
Answer: D
NEW QUESTION # 106
Which type of training is critical to attaining a successful objective of a physical security program implemented to safeguard all employees and meet the organization's security objectives?
- A. Security procedures
- B. Security awareness
- C. Security policy
- D. Security operations
Answer: B
Explanation:
Security awareness training ensures that all employees understand security policies, recognize threats, and know how to respond appropriately. It is critical for creating a proactive security culture and ensuring that all layers of defense-including human factors-are effective.
A, B, and D refer to specific training content areas, but security awareness encompasses overall employee engagement and is critical for program success.
References:
PSP Study Guide - Security Training and Awareness Programs
POA Manual - Organizational Security and Employee Participation
NEW QUESTION # 107
Which department has total supervision over a firm's money and will generally be the area most vulnerable to major loss due to crime?
- A. Shipping and Receiving
- B. Data-Processing
- C. Purchasing
- D. Accounting
Answer: D
Explanation:
The accounting or finance department typically has oversight of all monetary assets, including cash flow, budgets, payroll, and financial reporting. This central role makes it particularly vulnerable to internal fraud, embezzlement, and cybercrime. Security measures here often include both physical controls and procedural checks (e.g., audits, access controls, separation of duties).
References from PSP: Organizational Vulnerability - ASIS POA; PSP Study Guide - Internal Threats and Crime Risks
NEW QUESTION # 108
A business impact analysis is used to help management and the business continuity planner decide:
- A. The number of hot sites
- B. Which functions are critical to the continued operation of the organization
- C. The budget for the program
- D. How to best allocate personnel resources during a disaster
Answer: B
Explanation:
Comprehensive Detailed Explanation:
A Business Impact Analysis (BIA) identifies and prioritizes critical business functions that are essential to the survival and continuity of operations. The results of the BIA help guide recovery strategies, resource allocation, and business continuity planning.
A (Budget) and B (Personnel allocation) are determined later, informed by the BIA.
C (Number of hot sites) is a strategic outcome but not the direct purpose of the BIA.
References:
PSP Study Guide - Business Continuity and Disaster Recovery
POA Manual - Business Impact Analysis Principles
NEW QUESTION # 109
For preventive maintenance to be effective, each piece of equipment to be maintained must have documentation that includes:
- A. Component failure rates
- B. The mean time between failures (MTBF)
- C. System performance reports
- D. Manufacturer specifications
Answer: D
Explanation:
Comprehensive Detailed Explanation:
To implement effective preventive maintenance, you must have access to the manufacturer's specifications for each component. These specifications provide details such as recommended maintenance intervals, acceptable tolerances, environmental operating conditions, and part replacement guidelines.
A (MTBF), B (Performance reports), and C (Failure rates) are useful for analysis, but the foundational document for preventive action is the manufacturer's specification.
References:
PSP Study Guide - Maintenance Management
POA Manual - Preventive Maintenance and Equipment Standards
NEW QUESTION # 110
Which of the following is considered the cornerstone of any construction project?
- A. Drawings
- B. Guidelines
- C. Procedures
- D. Specifications
Answer: D
Explanation:
Comprehensive Detailed Explanation:
Specifications are considered the cornerstone of any construction project because they define the materials, workmanship, quality standards, and installation requirements. They ensure consistency, compliance with design intent, and are the foundation upon which contractors bid and work.
A (Drawings) show layout but don't specify materials or quality.
B (Guidelines) are general and not enforceable.
C (Procedures) guide execution but are not foundational to the build.
References:
PSP Study Guide - Construction and Design Documents
POA Manual - Specifications in Security System Construction
NEW QUESTION # 111
What involves walking or riding a given route to observe the condition of the facility?
- A. Reserves
- B. None of the above
- C. Patrol duty
- D. Posts
Answer: C
NEW QUESTION # 112
The introduction of holography into badge control systems reduces the chance of:
- A. Security
- B. Intrusion
- C. Counterfeiting
- D. Theft
Answer: C
NEW QUESTION # 113
Which of the following should prospects submit to qualify for a physical security project?
- A. Bidder's questionnaire
- B. Intent-to-bid letter
- C. Customer references
- D. Executive biographies
Answer: A
Explanation:
A bidder's questionnaire is used to prequalify vendors by gathering essential information such as financial stability, past project experience, insurance coverage, and relevant certifications. It ensures that only capable and qualified bidders are considered for a physical security project.
A (Intent-to-bid letter) shows interest but doesn't assess qualifications.
B and D (References and executive bios) may be part of the questionnaire but are not standalone qualifying documents.
References:
PSP Study Guide - Vendor Selection and Procurement
POA Manual - Bidding Procedures and Prequalification
NEW QUESTION # 114
______________ has been defined as the impact of a loss as measured in dollars.
- A. Immorality
- B. Corruptness
- C. Loss reserves
- D. Criticality
Answer: D
Explanation:
In security and risk management, criticality refers to the importance or impact of a loss, typically measured in monetary terms. It helps determine how severely the loss of an asset, process, or system could affect operations, productivity, or safety. Understanding criticality allows security professionals to prioritize protection efforts based on potential financial and operational consequences.
References from PSP: Risk Assessment Terminology - ASIS POA; PSP Study Guide - Asset Valuation and Risk Impact
NEW QUESTION # 115
__________ is a plant, building, office, institution, or any commercial or industrial structure or complex with all the attendant structures and functions that are part of an integrated operation.
- A. Interior
- B. Padlocks
- C. Contents
- D. Facility
Answer: D
NEW QUESTION # 116
Which of the following conditions affects the sensitivity of a capacitance proximity sensor?
- A. Rapid movement of air through the electromagnetic field
- B. Changes in relative temperature
- C. End of line resistance
- D. Changes in relative humidity
Answer: D
Explanation:
Capacitance proximity sensors detect changes in electrical capacitance, which can be influenced by environmental conditions. Changes in relative humidity can affect the dielectric properties of the air or materials nearby, potentially causing false alarms or degraded performance.
B (Temperature) and C (Air movement) typically affect other sensor types (e.g., infrared or ultrasonic).
D (End-of-line resistance) applies to alarm circuit supervision, not proximity sensing.
References:
PSP Study Guide - Intrusion Detection Technologies
POA Manual - Capacitance Sensor Functionality and Environmental Factors
NEW QUESTION # 117
Which of the following is best for reducing the number of nuisance alarms?
- A. Placing signage on the inside of doors
- B. Having security guards patrol after hours
- C. Examining janitorial programs and ensuring that cleaning is done only during the day
- D. Conducting frequent door inspections and promptly replacing faulty components
Answer: D
Explanation:
Nuisance alarms, particularly from doors, are often caused by mechanical failures such as worn hinges, faulty magnetic switches, or misaligned contacts. Regular inspections and maintenance are the most effective way to reduce false alarms.
Signage (A) helps inform but doesn't fix the mechanical issue.
Patrols (C) are reactive, not preventative.
Janitorial scheduling (D) can reduce traffic but doesn't address faulty hardware.
References:
PSP Study Guide - Alarm Systems and False Alarm Reduction
POA Manual - Electronic Security Maintenance Protocols
NEW QUESTION # 118
Premeditated, politically motivated violence perpetrated against noncombatant targets by sub-national groups or clandestine agents, usually intended to influence an audience is called:
- A. Violence
- B. Criminal approach
- C. Terrorism
- D. Theft
Answer: C
Explanation:
This definition matches the U.S. Department of State and ASIS definitions of terrorism. It highlights the political and psychological components of terrorism, including the targeting of civilians and the intent to instill fear or send a political message.
References:
ASIS International, Protection of Assets (POA), Chapter: Terrorism
U.S. Department of State, Patterns of Global Terrorism
ASIS PSP Study Guide, Domain 1: Risk and Threat Assessment
NEW QUESTION # 119
Which class of fire, fires and extinguishes deal with cooking oil fires?
- A. Class K
- B. Class L
- C. Class D
- D. Class C
Answer: A
NEW QUESTION # 120
Nechaev defined _____________ as in which a man who is already lost, has broken all links with society and the world of civilization, with its laws and conventions, with its social etiquette and its moral code.
- A. Consolation
- B. Transformation
- C. Terrorism
- D. Revolution
Answer: C
Explanation:
Sergey Nechaev, a 19th-century Russian revolutionary, provided an extreme ideological foundation for terrorism. His definition emphasized a total disconnection from moral and social norms, promoting violence as a revolutionary tool. His "Catechism of a Revolutionary" laid the groundwork for early anarchist-terrorist thinking.
References:
ASIS International, Protection of Assets (POA), Chapter: Terrorism and Threat Assessment ASIS PSP Study Manual, Domain 1: Threat and Vulnerability AssessmentSergey Nechaev, a 19th-century Russian revolutionary, provided an extreme ideological foundation for terrorism. His definition emphasized a total disconnection from moral and social norms, promoting violence as a revolutionary tool. His "Catechism of a Revolutionary" laid the groundwork for early anarchist-terrorist thinking.
References:
ASIS International, Protection of Assets (POA), Chapter: Terrorism and Threat Assessment ASIS PSP Study Manual, Domain 1: Threat and Vulnerability AssessmentSergey Nechaev, a 19th-century Russian revolutionary, provided an extreme ideological foundation for terrorism. His definition emphasized a total disconnection from moral and social norms, promoting violence as a revolutionary tool. His "Catechism of a Revolutionary" laid the groundwork for early anarchist-terrorist thinking.
References:
ASIS International, Protection of Assets (POA), Chapter: Terrorism and Threat Assessment ASIS PSP Study Manual, Domain 1: Threat and Vulnerability Assessment
NEW QUESTION # 121
......
To be eligible for the ASIS ASIS-PSP Exam, candidates must have a minimum of five years of professional experience in physical security management or a related field. Candidates can substitute some of this experience with an undergraduate or graduate degree in a related field. Candidates must also be members of ASIS International, the professional association for security management professionals.
ASIS ASIS-PSP: Selling Physical Security Professional Products and Solutions: https://www.lead2passed.com/ASIS/ASIS-PSP-practice-exam-dumps.html
ASIS-PSP exam dumps and online Test Engine: https://drive.google.com/open?id=1yhfwOfXuz-Sf7mVQP6WuPcIy1K7xYxRc
