2021 Verified HPE0-J58 dumps Q&As on your HPE Master ASE Exam Questions Certain Success!
HPE0-J58 Exam Dumps - 100% Marks In HPE0-J58 Exam!
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 33
A customer has a solution from another vendor. The customer ran into issues of a disproportionally high failure rate of media keeping logfile datA. The issue also appeared in the second array, to which the data is being replicated.
The customer specifically asks you for a solution that will not have this same issue. Which feature of HPE
3PAR arrays should you emphasize?
- A. inline compression and data packing
- B. creating snapshots on different physical disks
- C. wide striping data across controllers and disks
- D. ASIC accelerated thin provisioning
Answer: A
NEW QUESTION 34
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. DD Analyzer
- B. NinjaCrawler
- C. HPE Infosight
- D. SAF Collect
Answer: B
NEW QUESTION 35
A customer has recently acquired another company that is located less than 3 km from their current main location. Both locations use HPE B-Series products in their storage environment.
The customer needs to merge the 2 locations together while still using the current WAN and networking infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.
Which protocol should be incorporated when providing a proposal to meet the customer needs?
- A. DWDM
- B. CWDM
- C. ISCSI
- D. FCIP
Answer: B
NEW QUESTION 36
A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner.
Which Bandwidth parameter should the customer use?
- A. Array-to-array Limit
- B. Per-partner limit
- C. Overall limit policy
- D. Partner Maximum limit
Answer: A
NEW QUESTION 37
A customer is expecting rapid growth of their data storage needs on their HPE Nimble arrays. Which HPE tool should you recommend to best assist with capacity planning?
- A. One Config Advanced
- B. NinjaCrawler
- C. NinjaStars for Nimble
- D. InfoSight
Answer: A
NEW QUESTION 38
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of two minutes
- B. They need to send a screenshot of the volumes tab
- C. They have an RPO of four minutes
- D. They need to verify the RPO level from the host vc-ms-fileserver
Answer: C
NEW QUESTION 39
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- B. The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array
- C. Compression technologies increase the effective bandwidth being available for replication and disaster recovery
- D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
Answer: D
NEW QUESTION 40
You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated requirement of RPO=0. What is a key consideration you need to explain to the customer?
- A. Host write latencies will increase
- B. Host writes can be committed to either primary or backup storage before host acknowledgment
- C. Host write latencies will decrease
- D. RC sync can only be deployed over FC links
Answer: A
NEW QUESTION 41
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth is sufficient, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 5 minutes
Answer: D
Explanation:
Explanation
NEW QUESTION 42
You are proposing StoreOnce as a new backup target.
Which features should you emphasize that will help the customer protect and recover data from external attacks on local data? (Select two.)
- A. StoreOnce has firewalls to protect the repositories
- B. StoreOnce has malware protection
- C. StoreOnce has encryption of data at rest and data in-flight
- D. StoreOnce is immune from ransomware
- E. StoreOnce Catalyst stores are only accessible via the API
Answer: C,D
NEW QUESTION 43
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than
1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
- A. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
- B. The Quorum Witness initiates the fail-over, passing control to the standby array
- C. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
- D. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
- E. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
Answer: A,D
NEW QUESTION 44
A customer has an HPE Nimble Storage array. They plan to add a second HPE Nimble Storage array to their existing group.
What is the expected write behavior to a volume once the new array is added to the same pool as the existing array?
- A. Data will continue to write to the first array until there is 40% free space available, and then alternate writes between the two arrays
- B. Data will be written to the new array until it is the same percent full as the original array
- C. Data will immediately start to alternate writes between the two arrays
- D. Data will be stripped and automatically re-balanced across the two arrays
Answer: B
NEW QUESTION 45
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. tunevv
- B. checkvv
- C. convertvv
- D. showvv
Answer: B
Explanation:
Explanation/Reference: https://manualzz.com/doc/34471724/hpe-3par-adaptive-data-reduction
NEW QUESTION 46
Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?
- A. Remote Copy support up to 100ms latency over all transport layers
- B. automatic recovery of array failure independent of Remote copy topology
- C. all Remote Copy topologies yield identical RPO and RTO
- D. support of all Remote Copy topologies
Answer: D
NEW QUESTION 47
A customer wants to implement a disaster recovery plan for their current HPE 3PAR array datA. They have obtained a remote site 10km away their primary site. They have performed bandwidth testing, and have confirmed their RTT is approximately 100ms. The customer needs to provide data replication to assure the best data availability they can achieve. Which synchronization method meets their needs?
- A. Peer Persistence
- B. Asynchronous Periodic Remote Copy
- C. Asynchronous Streaming
- D. Synchronous Remote Copy
Answer: B
NEW QUESTION 48
......
Pass Your HPE0-J58 Exam Easily With 100% Exam Passing Guarantee: https://www.lead2passed.com/HP/HPE0-J58-practice-exam-dumps.html
