[2024] Get Top-Rated Nutanix NCSE-Core Exam Dumps Now
Passing Key To Getting NCSE-Core Certified Exam Engine PDF
NEW QUESTION # 88
An SE needs to leverage Change Block Tracking when using Xtract to migrate VMs from ESXi to AHV.
Which two source VM requirements should the SE verify? (Choose two)
- A. Virtual hardware version
- B. Minimum guest OS version
- C. VMware Tools installed
- D. Nutanix Guest Tools installed.
Answer: B,D
NEW QUESTION # 89
What are two things that the ADS service does for VMs within AHV? (Choose two.)
- A. Invoke workload movement if there is contention of resources.
- B. Re-balance powered-on VMs evenly throughout the cluster
- C. Balance VMs throughout the Cluster when the VM is first powered on
- D. Invoke workload movement when there is no contention of resource
Answer: C,D
NEW QUESTION # 90
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?
- A. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
- B. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.
- C. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.
- D. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
Answer: D
NEW QUESTION # 91
A customer needs a tool packaged as a VM that uses realistic workloads paired with real-world test scenarios for HCI environments.
The goal to benchmark performance during typical workflows and failure events.
Which Nutanix tool meets these tequErements?
- A. Foundation
- B. Cluster Check
- C. Move
- D. X-Ray
Answer: D
NEW QUESTION # 92
A Nutanix customer needs to migrate 1000VMs from ACME Public Cloud to a local Nutanix cluster ACME Public Cloud operates on VMware ESXi, Hp ProLiant Servers with 3PAR storage. ACME Public Cloud denies customers access to vCenter or ESXi hosts But they do replicate a copy of the virtual disks to external storage.
Which method should the customer use to migrate the VMs to a local Nutanix Cluster?
- A. Use the latest copy of VMs on external storage to import on the local Nutanix cluster
- B. Deploy Nutanix Community Edition in ACME Public Cloud and replicate VMs to local Nutanix cluster.
- C. Use Xtract for VMs to migrate VMs from ACME Public Cloud vCenter to local Nutanix cluster.
- D. Use Calm to automate and orchestrate deployment on the local Nutanix cluster.
Answer: A
NEW QUESTION # 93
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Destroy a cluster.
- B. Remove a Node from a cluster
- C. Upgrade a cluster
- D. Move Nodes between clusters.
- E. Migrate a cluster
Answer: A,B,D
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_managing_c.html Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION # 94
A prospect has 8500GB of capacity provisioned for a non-production VMware cluster As part of migrating to Nutanix the prospedage to convert any thick provisioned disks to thin provisioned disks. Based on additional data, the total active working set for the duster has been determined to be 1TB.
When entering the Raw Input workload into Sizer, what is the minimum amount of HDD Capacity required for the workload?
- A. 4.0 TiB
- B. 3.5 TiB
- C. 7.5 TiB
- D. 3.0 TiB
Answer: D
NEW QUESTION # 95
A prospective customer provides the data shown captured from their existing environment using RVTools. The prospect has additional historical CPU utilization data that indicates peak CPU utilization never exceeds 50% on either physical host, but they want to keep their current vCPU:pCore ratio Based on the data provided, which vCPU:pCore ratio should be used for the Raw Input workload in Sizes?
- A. 2:1
- B. 5:1
- C. 3:1
- D. 4:1
Answer: A
NEW QUESTION # 96
A systems engineer sizers an environment based on the customer's requirement of N+2 resiliency for the entire cluster. In which two ways could the configuration be changed to meet the customer's requirements ? (Choose Two)
- A. Increase the SSD capacity per Node
- B. Increase the CPU capacity per Node
- C. Increase the number of Nodes
- D. Increase the RAM capacity per Node
Answer: A,D
NEW QUESTION # 97
During a sales motion with a new prospect, the prospect asks to do a POC so they can experience Nutanix in their environment.
What is the most important item the SE must have in place with the prospect before moving forward with a POC?
- A. Defined and measurable success criteria
- B. Number of Nodes/Block to be used during the POC
- C. Meeting frequency
- D. Start date of the POC
Answer: A
NEW QUESTION # 98
AN SE determines that a POC is necessary to overcome competitive FUD in an opportunity with an Enterprise account evaluating several HCI solutions. The customer will evaluate three solutions in their datacenter simultaneously over the course of 4 days.
The customer schedules all necessary personnel to be available during this time.
Which two network planning items should the SE determine prior to allocation hardware for the POC? (Choose two)
- A. CVM and hypervisor IP address
- B. VLAN tags
- C. Switch port type
- D. Source and number of cables
- E. TOR switch redundancy configuration
Answer: C,D
NEW QUESTION # 99
Refer to the exhibit.
A prospect provides the data shown captured from their existing environment using RVTools. The prospect has additional historical CPU utilization data that indicates peak CPU utilization never exceeds 50% on either physical host.
Which vCPU:pCore ratio should be used in Sizer?
- A. 4:1
- B. 5:1
- C. 3:1
- D. 2:1
Answer: A
NEW QUESTION # 100
Which two targets are valid options when selecting a remote site to Prism? (Choose Two)
- A. Network attached storage
- B. Cloud
- C. Tape Library
- D. Physical Cluster
- E. XI Cloud Services
Answer: B,D
NEW QUESTION # 101
Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)
- A. Environments use the 192.168.5.0/24 CVM management network.
- B. Prism Elements and Prism Central have proxy configured.
- C. Environments do not have Internet access.
- D. Environments use Network Address Translation.
- E. Prism Elements and Prism Central art in different subnets.
Answer: A,C,D
NEW QUESTION # 102
An existing customer is considering deploying a new Splunk project onto their Nutanix infrastructure. The customer inquires about potential storage capacity saving for their splunk workload.
Which two Nutanix capacity optimization features should the SE recommend? (Choose two)
- A. Capacity tier de-duplication.
- B. Inline compression.
- C. Erasure coding.
- D. Post-process compression.
Answer: C,D
NEW QUESTION # 103
An SE needs to size a new project that requires offsite backup but not remote disaster recovery. The prospect requires an RTO of 48 hours, RPO of 4 hours, and the ability to restore from the past 5days of backups. The prospect's data change rate is 1%.
How should the SE configure Sizer for this scenario?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION # 104
A customer plans to migrate a business critical, high transaction application to nutanix. Currently the application is running on a physical server with 256GB of RAM and 12 CPU cores at > 80% utilization. To run the VM on a single NUMA node, which processor configuration should the systems engineer recommend for this workload?
- A. CPUs (8 Cores each @ 2.1Ghz), 16 Cores total
- B. CPUs (10 Cores each @ 3.4Ghz), 20 Cores total
- C. CPUs (16 Cores each @ 2.8GHz), 32 Cores total
- D. CPUs (8 Cores each @ 1.8Ghz), 16 Cores total
Answer: B
NEW QUESTION # 105
A prospect provides the following details for sizing active working set based on their existing server virtualization environment:
Full backup reports:
January: 10TB
February: 11TB
March: 12TB
April: 13TB
May: 14TB
Average Read/Write Ratio - 75/25
When entering a Raw Input in Sizer, what should the SE use as the minimum amount of required SSD Storage?
- A. 6TB
- B. 1.5TB
- C. 4.5TB
- D. 3TB
Answer: D
NEW QUESTION # 106
How should an administrator correct an SSL error when connecting to a Nutanix cluster?
- A. Add the SSL certificate to an AD group policy applied to all computer objects
- B. Add the SSL certificate to the workstation's trusted people store
- C. Create a new self-signed certificate for the cluster with a 4096 bit key
- D. Create a new SSL certificate for the cluster signed by an AD certificate authority
Answer: D
NEW QUESTION # 107
A prospect is conducting a Nutanix POC process that will measure the time to revocer from a power loss, the impact of running multiple workloads on the same cluster, and peak storage performance. The POC results will be presented to the CIO.
How can this be achieved with the least room for error?
- A. Use iOmeter and manually power off the nodes.
- B. Use X-Ray with the included scenarios and deliver the X-Ray PDF report.
- C. Use HCI Bench, manually power off the nodes during testing, and export Prism Analysis data.
- D. Use X-Ray to generate a single workload and VDbench for the secondary workload.
Answer: B
NEW QUESTION # 108
Which three settings are required for network switch discovery in Prism? (Choose Three)
- A. SMTP Server IP address
- B. Switch Management IP Address
- C. AHV Host IP address
- D. Cluster CVM IP address
- E. SNMP Community Name
Answer: B,C,E
NEW QUESTION # 109
When planning an Oracle database deployment on Nutanix, which best practice should the SE consider?
- A. Creating one storage container per database
- B. Choosing nodes with higher clock speed and fewer cores.
- C. Ensuring deduplication is enabled.
- D. Choosing nodes with more cores and lower clock speed
Answer: B
NEW QUESTION # 110
A customer is running AHV in their Nutanix cluster and wants to provide their users with the ablility to restore individual files from snapshots.
What is the minimum level of licensing that must be applied to the Nutanix cluster?
- A. Pro with the Advanced Replication SKU
- B. Pro
- C. Starter
- D. Ulimate
Answer: B
NEW QUESTION # 111
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issue. The Windows VMs do not experience the same issue. Which option should the administrator use to resolve this issue?
- A. Set the SCSI timeout value to 60
- B. Utilize a separate subnet for the Linux VMs
- C. Utilize Jumbo Frames
- D. Add additional disks to the Volume Group
Answer: A
NEW QUESTION # 112
What are two key Nutanix value propositions? (Choose two)
- A. Lowest initial cost than a comparable competitive HCI or 3-tier solution
- B. Highest performance across all workload types
- C. One-Click Infrastructure Management
- D. Rapid time to value
Answer: B,C
NEW QUESTION # 113
......
NCSE-Core exam questions for practice in 2024 Updated 197 Questions: https://www.lead2passed.com/Nutanix/NCSE-Core-practice-exam-dumps.html
NCSE-Core Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=14L1eWGKCBEeSK1UgZb20Ep6benerlBj1
