71300X PDF Exam Material 2022 Realistic 71300X Dumps Questions
Updated Avaya 71300X Dumps – PDF & Online Engine
NEW QUESTION 39
You are setting up the SIP connection between Avaya Aura Messaging (AAM) and the Avaya Aura Core, and the information you have entered for the Far-end connection is:
What should you conclude from all this information?
- A. There will be conflicts in the TLS connections given that 5061 is a well-known port that other Endpoints and Servers use within the same network.
- B. The IP address is wrong because its range does not correspond to a valid TLS-compatible IP address.
- C. A Security Certificate from the same Certificate Authority as the other Avaya Aura components, must be installed on the AAM Server to guarantee successful TLS Connections.
- D. The connection cannot work because 5061 is not the Well-known port corresponding to TLS by standard.
Answer: C
NEW QUESTION 40
For an Avaya SIP telephone, working as a Remote Worker via the Avaya Session Border Controller for Enterprise (SBCE), which IP address should be configured in the Server List of the one-X Communicator?
- A. the SBCE Internal Interface allocated for Mobile Workspace Endpoint
- B. the SBCE External Interface allocated for Mobile Workspace Endpoint
- C. the Internal Avaya Aura Session Manager SM100 IP Address
- D. the Avaya Aura Session Manager External Interface allocated for Mobile Workspace Endpoints.
Answer: D
Explanation:
Explanation
Remote Worker Avaya one-X Communicator Configuration
The following screens illustrate Avaya one-X Communicator administration settings for the Remote Worker used in the reference configuration.
Example:
1. On the Avaya one-X Communicator application running on the PC, click on the Settings icon on the top right to display the Settings window.2. Click on Telephony, the General Settings window will appear. The following values were used in the reference configuration:
Under Using: select SIP (SIP must be selected; H.323 is not supported for Remote Workers).
* Under Server List, click Add (the Add Server window to the right will appear).
* Under Proxy Server enter 192.168.157.180 (This is one of the two "public" IP addresses for interface B1 on the Avaya SBCE used for Remote Worker access to Session Manager (public IP not used for relay services).
Etc.
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 81
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 41
Which statement about enabling IM and Presence for a user is true?
- A. In SMGR, edit the Communication Profile of the user to assign a XMPP handle and check the Presence profile checkbox.
- B. In SMGR, edit the Communication Profile of the user to assign an Avaya Presence/IM handle and check the Presence profile checkbox.
- C. In SMGR, edit the Communication Profile of the user to assign an Avaya SIP handle and check the Presence profile checkbox.
- D. In SMGR, edit the Communication Profile of the user to assign an Avaya E.164 handle and check the Presence profile checkbox.
Answer: C
Explanation:
Explanation
Communication Profile tab: Presence Profile
Fields include:
* The SIP Entity field used to route SIP based messages through the Presence Services.
* IM Gateway The IP address of the IM gateway
Note: Avaya SMGR stands for Avaya System Manager.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3 November
2016, page 554
https://downloads.avaya.com/css/P8/documents/101008185
NEW QUESTION 42
By default, which Codec does Avaya Aura Messaging (AAM) support?
- A. G.711
- B. G.726
- C. G.722
- D. G.729
Answer: A
Explanation:
Explanation
You must configure the Messaging system to use the G.711 encoding format.
Note: The G.711 format provides the highest audio quality especially when voice networks use multiple encodings and decodings. Avaya requires that you use the G.711 encoding format in Messaging systems that support TTY devices.
The G.711 encoding format uses a higher encoding rate than GSM. The G.711 encoding format therefore produces larger files and requires more storage space for messages. Messaging provides customers with adequate storage space for message playback and networking.
References: Administering Avaya Aura Messaging, Release 6.2 Issue 2.2 (December 2013) , page 201
https://downloads.avaya.com/css/P8/documents/100172127
NEW QUESTION 43
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?
- A. Verify that Avaya BreezeTM is licensed.
- B. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
- C. Verify that an enrollment password is configured on System Manager and that it has not expired.
- D. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.
Answer: C
Explanation:
Explanation
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
b. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page 223
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 44
When Avaya Aura Presence Services is implemented, which statement is true about Port Management?
- A. It allows multi-media services over a standard Web-Browser.
- B. Port 5222 is used for one-X Endpoints, while Port 5269 is open for connecting with other XMPP
3rd-Party Servers. - C. It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.
- D. It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.
Answer: B
Explanation:
Explanation
Port 5222: XMPP connection configuration
The Connection Manager runs by default when you install the XCP server. It is configured with a JSM Command Processor and two XMPP directors. The XMPP directors handle communication with IM clients.
One of the directors is configured to use port 5222 and the other is configured to use port 5223 for secure communications.
Port 5269:Example Obtaining the Server-to-Server Port from an Openfire server Procedure
1. Log in to the Openfire Web console.
2. Click Server > Server Settings > Server to Server.
3. In the Service Enabled section, the Enabled check box should be checked, and the port value is contained in the box to the right of Remote servers can exchange packets with this server on port.
By default the value is 5269, and it is recommended that this default value be maintained.
References: Administering Avaya Aura Presence Services, Release 6.2.4, (June 2014), pages 110, 154
https://downloads.avaya.com/css/P8/documents/100180467
NEW QUESTION 45
WebRTC is used for which type of calls?
- A. calls originated from internal and external web browsers
- B. video calls only
- C. calls originated from external web browsers only
- D. calls originated from internal web browsers only
Answer: A
Explanation:
Explanation
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 6
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 46
Which three steps are necessary to make a successful Implementation of Avaya BreezeTM WebRTC Snap-in?
(Choose three.)
- A. Busy and Release the WebRTC snap-in.
- B. Manually configure the WebLM IP address in the WebRTC configuration attributes.
- C. Download and Install WebRTC License file.
- D. Install the Snap-in.
- E. Load the Snap-in.
Answer: C,D,E
Explanation:
Explanation
Step 1: Download and install the license file
Procedure
0. Download the snap-in license file from PLDS.
1. On System Manager navigate to Home > Services > Licenses.
2. Select Install License.
3. Browse to the location of the snap-in license.
4. Select the license file and click Open.
5. Click Accept the License Terms & Conditions and click Install.
The system installs the license file.
In the left navigation pane, the system displays the snap-in under Licensed Products.
Step 2: Load the snap-in
Step 3: Install the snap-in
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 15
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 47
In the Avaya Session Border Controller for Enterprise (SBCE), before a traffic carrying Network Interface (A1 or B1) can be pinged, to which state do you have to toggle the status on Device Specific Settings > Network Management / Interfaces?
- A. Enabled
- B. Accept Service
- C. In-Service
- D. Active
Answer: A
Explanation:
Explanation
Commission the SBC-SBC Configuration
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
203
NEW QUESTION 48
On Avaya Session Border Controller for Enterprise (SBCE), which statement about how to examine messages with Wireshark is true?
- A. You can start and stop a Packet Capture in the EMS web GUI and then you can open the .pcap file with Wireshark.
- B. Wireshark runs directly on Avaya Session Border Controller for Enterprise (SBCE).
- C. They cannot be examined on this version.
- D. You have to start and stop the .pcap file using command line.
Answer: A
Explanation:
Explanation
Viewing the Packet Capture with Wireshark.
0. Start a Packet Capture in the EMS web GUi.
1. After the capture completes, click the Capture tab.
2. Double-click on the capture file name.
3. The File Download window opens.
4. Click Open.
The Wireshark application opens the trace.
Note: The Wireshark call tracing tool can be used on virtual desktop for vLabs.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
468
NEW QUESTION 49
Which statement about Avaya Aura Presence Services 7.x snap-in licensing is true?
- A. It requires a license file for each snap-in installed.
- B. It requires a per-user license.
- C. It does not require a license to work.
- D. It requires an instance-license.
Answer: C
Explanation:
Explanation
Presence Services snap-in does not require a license to work.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 17
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 50
Which statement about the SIP Entities to support Avaya Aura Presence Services is true?
- A. Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = "Engagement Development Platform", and the other is of Type = "Presence Services".
- B. Only one SIP Entity is built of Type = "Presence Services", which uses the SM100 IP address of the Avaya BreezeTM node.
- C. Only one SIP Entity is built of Type = "Engagement Development Platform", which uses the SM100 IP Address of the Avaya BreezeTM node.
- D. Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = "Engagement Development Platform", and the other is of Type = "Other".
Answer: C
NEW QUESTION 51
In Avaya Aura System Manager, how is Avaya Aura Messaging (AAM) added to the list of Managed Elements?
- A. It can only be manually added.
- B. It is added when you configure the AAM SIP Entity in SMGR.
- C. It is automatically added during the enrollment process.
- D. It is automatically added using initTM -f command on the Command Line Interface of AAM.
Answer: D
Explanation:
Explanation
In System Manager, element installation sets up the trust between System Manager and its managed elements.
. Similarly, UCM has a trust management process to set up the trust between UCM and its managed elements.
To enable managed elements of UCM to be in the same trust domain as the System Manager managed elements, you must import the UCM Certificate Authority (CA) certificate to the System Manager managed element's trusted certificate list.
Note: To force a re-initialization of trust management
1. Ensure the enrollment password in the System Manager Security -> Enrollment Password screen is valid and set. Make note of this password as it will be needed when running the trust management initialization command.
2. Log into the Session Manager virtual machine IP address with an ssh client as the craft or customer account login
3. Execute the following shell command once at the shell prompt:
$ initTM -f
This will prompt you for the enrollment password and then initialize trust management and the database replication service of the Session Manager.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3, Issue 8, November 2016, page 1073
https://downloads.avaya.com/css/P8/documents/101008185
https://downloads.avaya.com/css/P8/documents/100161692
NEW QUESTION 52
When configuring a SIP Entity for Avaya Aura Messaging (AAM) in Avaya Aura System Manager, which Type of SIP entity needs to be selected?
- A. Other
- B. Messaging
- C. Communication Manager Messaging
- D. Avaya Aura Messaging
Answer: A
Explanation:
Explanation
Define SIP Entity
Expand Elements, Routing and select SIP Entities from the left navigation menu.
Click New (not shown). In the General section, enter the following values and use default values for remaining fields.
* Name: Enter an identifier for the SIP Entity
* FQDN or IP Address: Enter IP address of Avaya Aura Messaging.
* Type: Select "Other"
Etc.
References: Application Notes for Configuring Avaya Aura Messaging 6.1 as a Voice Messaging Solution for Avaya Aura Communication Manager 6.0.1 Feature & Evolution Server Using SIP Trunks and Avaya Aura Session Manager 6.1 - Issue 1.0 , page 22
https://www.devconnectprogram.com/fileMedia/download/08ad7375-7c2e-4767-929f-15f4e8130a0d
NEW QUESTION 53
The WebRTC snap-in needs to be loaded on which of Avaya BreezeTM cluster?
- A. Work Assignment EDP Cluster
- B. General Purpose EDP Cluster
- C. Context Store EDP Cluster
- D. Core Platform EDP Cluster
Answer: D
Explanation:
Explanation
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.
NEW QUESTION 54
You are creating a SIP Entity for Avaya Aura Engagement Development Platform - EDP / Avaya BreezeTM.
What do you have to enter in the field labeled FQDN or IP Address?
- A. the SM100 IP-address or FQDN of the Avaya BreezeTM platform
- B. the Management IP-Address or FQDN of the Avaya BreezeTM platform.
- C. the IP-Address or FQDN of general Purpose Cluster
- D. the IP-Address or FQDN of Core Platform Cluster
Answer: B
Explanation:
Explanation
Administering an Avaya Breeze instance
Before you begin
To complete this task you will need:
* The IP address of the Avaya Breeze Management Network Interface.
This is the same IP address you used when deploying the Virtual Machine (VM).
* The IP address including the network mask, and default gateway for the Avaya Breeze Security Module.
Procedure (see step 6 below)
1. On System Manager, in Elements, click Avaya Breeze.
2. Click Server Administration.
3. In the Avaya Breeze Server Instances list, click New.
4. In the SIP Entity field, select the SIP Entity that you created.
5. Ensure that the value in the UCID Network Node ID field is unique across the solution deployment so that it does not conflict with other UCID-generating entities like Avaya Aura Communication Manager or Avaya Aura Experience Portal.
6. In the Management Network Interface FQDN or IP Address field, type the IP address of the Avaya Breeze Management Network Interface.
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 47
https://downloads.avaya.com/css/P8/documents/101014426
NEW QUESTION 55
Which two options describe the purpose of TraceSM in the Avaya Aura Presence Services? (Choose two.)
- A. It captures live traces for both SIP and H323/XMPP clients.
- B. It captures Voice and Video Calls media packets in real-time.
- C. It captures Packet-Size statistics from every telephone call in Avaya Aura 7.
- D. It captures Contact details from every user connected to Avaya Aura Presence Services.
- E. It captures real-time XMPP traffic.
Answer: A,E
Explanation:
Explanation
It's important to know that traceSM is a real-time capture tool.
traceSM is an interactive perl script that allows an administrator to capture, view, and save call processing activity on a Session Manager. While not as powerful or versatile as wireshark, traceSM is absolutely essential when it comes to working with Avaya SIP. First off, it allows you to view SIP messages even if they have been encrypted with TLS.
References: https://andrewjprokop.wordpress.com/2014/06/02/a-necessary-guide-to-the-avaya-tracesm-utility/
NEW QUESTION 56
To watch Avaya Session Border Controller for Enterprise (SBCE) messages in real-time as they pass through the SBCE, which tool on the SIP command line do you use?
- A. trace
- B. traceTOOL
- C. traceSM -m
- D. traceSBC
Answer: D
Explanation:
Explanation
The tcpdump tool is the main troubleshooting tool of Avaya SBCE, which can capture network traffic. Using tcpdump is a reliable way to analyze the information arriving to and sent from the SBC.
However, tcpdump has its own limitations, which can make troubleshooting difficult and time consuming.
This traditional tool is not useful in handling encrypted traffic and real-time troubleshooting.
The traceSBC tool offers solutions for both issues.
In Real-time mode, traceSBC must be on active Avaya SBCE. traceSBC is started without specifying a file in the command line parameters. The tool automatically starts processing the log files. The live capture can be started and stopped anytime without affecting service.
Example:
# traceSBC
References: Troubleshooting and Maintaining Avaya Session Border Controller for Enterprise (December
2015), page 27
https://downloads.avaya.com/css/P8/documents/101014063
NEW QUESTION 57
Which component converts WebRTC Media Stream to SIP Media Stream?
- A. STUN/TURN server
- B. G.450/430 or G.650 Medpro board
- C. HTTP Reverse Proxy
- D. Avaya Aura Media Server (AAMS)
Answer: A
Explanation:
Explanation
Provisioning Avaya Aura Media Server for the WebRTC Snap-in.
Procedure
1. Log in to the Avaya Aura
Media Server Element Manager.
2. Check that Avaya Aura
Media Server nodes and routes are set up correctly.
See Deploying Avaya BreezeTM for details on configuring Avaya Aura
Media Server for Avaya BreezeTM.
3. Go to System Configuration > Server Profile > General Settings, enable Firewall NAT Tunneling Media Processor and then click Save.
4. Go to System Configuration > Signaling Protocols > SIP > General Settings, enable Always use SIP default outbound proxy, and then click Save.
Go to System Configuration > Media Processing > ICE > TURN/STUN Servers > Accounts and create a TURN/STUN account. This account ID and password must match the account created on the Avaya SBCE.
6. Go to System Configuration > Media Processing > ICE > TURN/STUN Servers > Servers to add the TURN/STUN connection to the Avaya SBCE server Etc.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 23
https://downloads.avaya.com/css/P8/documents/101013939
NEW QUESTION 58
......
Avaya 71300X Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Avaya 71300X Dumps PDF Are going to be The Best Score: https://www.lead2passed.com/AVAYA/71300X-practice-exam-dumps.html
