74950X Questions PDF [2022] Use Valid New dump to Clear Exam
Passing Avaya 74950X Exam Using 2022 Practice Tests
NEW QUESTION 17
Which certificate is used by the SDN Engine to create the default certificates during the initial ONA onboarding process?
- A. Avaya Surge Controller
- B. ODL Certificate
- C. ROOT CA Certificate
- D. Surge Config Certificate
Answer: B
NEW QUESTION 18
When the status of the ONA device state is in the Inactive state, which two tasks should you perform? (Choose two.)
- A. Apply service profile whitelists.
- B. Insure that the IoT Controller has connectivity to the ONA.
- C. Insure that the IoT device is connected to the ONA.
- D. Check the ONA LED to make sure it is solid green.
Answer: A,C
NEW QUESTION 19
Which two localization supports have been given to the Avaya Surge™ Application user interface?
(Choose two.)
- A. Spanish
- B. Chinese
- C. French
- D. German
Answer: B,D
NEW QUESTION 20
Given the description below:
To secure the Network traffic, the Avaya Surge™ IoT solution uses encrypted tunnels and flow-based rules to create granular white lists that protect both devices and Infrastructure from unwanted traffic.
Which Avaya Surge™ IoT feature does this statement describe?
- A. IP Flow Gateway
- B. VXLAN Gateway
- C. HyperSec Gateway
- D. IPX Security Gateway
Answer: D
NEW QUESTION 21
In the Avaya Surge™ IoT solution, the HyperSec Gateway is authenticated to the Avaya Surge™ IoT Controller, but does not accept tunnel connections.
When the HyperSec gateway is disabled in the Ready state, it will move to which state?
- A. Error state
- B. Disabled state
- C. Onboarded state
- D. Fixed state
Answer: D
NEW QUESTION 22
Each ONA follows an ONA Life Cycle Management to describe its states.
When the ONA is in the Active state, which statement is true?
- A. It is when a device is connected to the network for which the device inventory/profile is not present.
- B. It is when the device Inventory/profile Is present, and the device is in the network and authenticated, but the service profile is not associated.
- C. It is when the device Inventory/profile for the device is present, but is not associated to a service profile, and see the ONA is onboarded in the Avaya Surge™ IoT healthcare application.
- D. It is when the device Inventory/profile is present and associated to a service profile, and the device is in the network, authenticated, and operational.
Answer: B
NEW QUESTION 23
What is the default operating mode of the ONA?
- A. SDN
- B. Fabric Extend Mode
- C. NSV
- D. Network Adapter Mode
Answer: A
NEW QUESTION 24
Which Avaya Surge™ Administration user interface sub interface can be used to perform the software upgrades for ONA and HyperSec Gateway?
- A. Surge Administration user interface
- B. Device Software Management
- C. SDN Controller Device Orchestration user interface
- D. ONA/HyperSec Device Diagnostics user interface
Answer: B
NEW QUESTION 25
Which feature helps customers easily create the secure network segmentation for non-Avaya Fabric customers?
- A. SSL-wrapped PPP Tunnels
- B. IPSec Tunnels
- C. GRE Tunnels
- D. HTTPS Tunnels
Answer: B
NEW QUESTION 26
Which administration view provides information about invalid and active ONAs connected to the network through the Avaya Surge™ Administration user interface?
- A. Service Availability port-let
- B. Device Inventory port-let
- C. Server Status port-let
- D. ONA Diagnostics port-let
Answer: B
NEW QUESTION 27
Avaya Surge™ IoT Controller manages certificates for the ONA onboardlng process.
Which certificate is being used to sign the IoT device certificate?
- A. SDN Engine Certificate
- B. ROOT CA Certificate
- C. ODL Certificate
- D. Surge Config Certificate
Answer: B
NEW QUESTION 28
Avaya has introduced the Surge IoT solution to deliver, which three advanced networking technologies for Internet of Things? (Choose three.)
- A. Automated onboardlng and Mobility
- B. Traffic filtering and Flow Control
- C. IoT device fingerprinting
- D. Robust Network Segmentation
- E. Automating Network Core
Answer: A,D,E
NEW QUESTION 29
To monitor the network elements, which three protocols are used in an Avaya Surge™ IoT solution? (Choose three.)
- A. SNMP
- B. Telnet
- C. SSH
- D. Socket
- E. RDP
Answer: A,B,C
NEW QUESTION 30
While ordering the license File for Avaya Surge™ loT Controller, and before applying that license on the Avaya Surge™ Administration user Interface, which precaution must an administrator take?
- A. Make sure that the correct Network ID was used while generating the license.
- B. Make sure that the correct Host ID was used while generating the license.
- C. Make sure that the correct serial numbers were used while generating the license.
- D. Make sure that the correct System ID was used while generating the license.
Answer: A
NEW QUESTION 31
Which process is followed to write the service profile rules to allow traffic flow from ONAs?
- A. Gray listing
- B. White listing
- C. Black listing
- D. Rule listing
Answer: D
NEW QUESTION 32
When you see the link state does not contain the link Information in the Avaya Surge™ Application Network topology view, which corrective action will you take?
- A. Apply the service template and restart the IoT Controller.
- B. Apply service profiles and connect the ONA to the switch.
- C. Apply Flow Rules and discover the ONA.
- D. Apply service profiles and restart the ONA.
Answer: C
NEW QUESTION 33
According to the functionality, which feature describes an Avaya Surge™ IoT Controller?
- A. It is a solution that makes the process of managing devices and monitoring the credential easier for the administrator.
- B. It is a network provisioning tool that helps map the network topology.
- C. It is a centralized SDN based controller that programs ONA devices to easily control traffic from hundreds of IoT devices.
- D. It is Avaya Switch Management software.
Answer: D
NEW QUESTION 34
While implementing an Avaya Surge™ IoT solution, what are the two key recommended configurations it will stop the external hacks/breaches on IoT devices? (Choose two.)
- A. Implement HyperSec zones
- B. Segment the entire network
- C. Implement role firewalls
- D. Implement basic firewalls
- E. Subnet the entire network
Answer: C,D
NEW QUESTION 35
Which two key challenges need to be addressed In healthcare networks with emerging IoT solutions? (Choose two.)
- A. Regulatory landscape Is extensive
- B. Bandwidth utilization of IoT devices
- C. Overall IoT solution cost
- D. Increasing expectations on the patient experience
Answer: A,B
NEW QUESTION 36
When administrators deploy the Avaya Surge™ IoT solution using two EPS switches, in which mode do you need to configure the ERS switch ports?
- A. UntagPvidOnly
- B. TagPvidOnly
- C. TaggedandUntaggall
- D. Untagandtagall
Answer: C
NEW QUESTION 37
Each ONA follows an ONA Life Cycle Management to describe its states.
When the ONA is in the Invalid state, which statement is true?
- A. It is when a device is connected to the network for which the device inventory/profile is not present.
- B. It is when the device inventory/profile for the device is present, but is not associated to a service profile, and the ONA is onboarded in the Avaya Surge™ IoT healthcare application.
- C. It is when the device inventory/profile is present and associated to a service profile, and the device is in the network, authenticated, and operational.
- D. It is when the device inventory/profile is present and associated to a service profile, but the device is not in the network.
Answer: A
NEW QUESTION 38
To onboard the HyperSec Gateway to the avaya Surge™ IoT Controller, which two attributes are necessary? (Choose two.)
- A. HyperSec
- B. Instance Name
- C. Serial Number
- D. Session ID
Answer: A,B
NEW QUESTION 39
......
74950X Study Guide Brilliant 74950X Exam Dumps PDF: https://www.lead2passed.com/AVAYA/74950X-practice-exam-dumps.html
