BICSI OSP-002 Cert Guide PDF 100% Cover Real Exam Questions
Pass OSP-002 Exam - Real Questions and Answers
The OSP-002 certification is ideal for professionals in the telecommunications and networking industry, including OSP designers, engineers, consultants, and project managers. BICSI Outside Plant Designer (OSP) certification is recognized globally and demonstrates the candidate's ability to design, implement, and manage OSP projects to meet industry standards and best practices. A BICSI OSP-002 certification can help professionals advance their careers, increase their earning potential, and provide opportunities to work on large-scale OSP projects.
NEW QUESTION # 85
Premises cables must be rated for \_\_\_\_\_\_\_\_\_\_ to meet codes.
- A. Fire retardance
- B. Pull strength
- C. Weight in cable trays
- D. Bend radius
Answer: A
NEW QUESTION # 86
Which fiber typically has the largest core?
- A. POF
- B. Singlemode
- C. Multimode Graded Index
- D. Multimode Step Index
Answer: A
NEW QUESTION # 87
What do category ratings of UTP cable (e.g. Cat 3, Cat 5e, Cat 6 and Cat 6A) mean?
- A. How well the cables are made
- B. How far the cable will work in networks
- C. The performance level of UTP cable
- D. Flame retardance of the cable
Answer: C
NEW QUESTION # 88
For testing a terminated fiber optic cable or a patchcord, the instrument(s) you need is (are):
- A. Visual Fault Locator
- B. FO power meter and light source or OLTS (optical loss test set)
- C. Optical Time Domain Reflectometer
- D. Optical Continuous Wave Reflectometer
Answer: B
NEW QUESTION # 89
The common IEEE 802.11b wireless LAN is also called
- A. Hot Spot
- B. WiMax
- C. WiFi
- D. Bluetooth
Answer: C
NEW QUESTION # 90
The difference between a fiber optic connector and a splice is __________.
- A. Splices need expensive tools
- B. Connectors are demountable, while splices are permanent
- C. Connectors are smaller than splices
- D. Connectors require adhesives
Answer: B
NEW QUESTION # 91
A crimp-on connector like the Cat 5e/Cat 6 connector is also called a \_\_\_\_\_\_\_\_ connector.
- A. Insulation-displacement
- B. Solderless
- C. USOC
- D. Clipper
Answer: A
NEW QUESTION # 92
What is the maximum length of a permanently installed UTP cabling link allowed in structured cabling standards?
- A. Depends on the electronics running on the link
- B. 100 meters
- C. 90 meters
- D. 100 feet
Answer: C
NEW QUESTION # 93
Gigabit Ethernet uses all four pairs of a UTP cable \_\_\_\_\_\_\_\_\_.
- A. For power
- B. With 2 pairs in each direction
- C. Simultaneously and bidirectionally
- D. Bidirectionally
Answer: C
NEW QUESTION # 94
If you use a Cat 3 UTP jack on newer Cat 5e cable plant, the link performance will meet \_\_\_\_\_\_specs.
- A. Cat 3
- B. Cat 6
- C. Cat 5E
- D. Cat 5
Answer: A
NEW QUESTION # 95
Which cable is used in most outdoor applications?
- A. Loose Tube
- B. Distribution
- C. Simplex
- D. Breakout
Answer: A
NEW QUESTION # 96
Which multimode insertion loss test reference method is required in industry standards?
- A. FOTP-34
- B. Any method as long as it is documented
- C. OFSTP-14
- D. FOTP-171
Answer: C
NEW QUESTION # 97
Standard UTP (unshielded twisted pair) copper cabling for voice and data installations has how many pairs of wire?
- A. Twenty-five
- B. Four
- C. Three
- D. Two
Answer: B
NEW QUESTION # 98
Underground cable generally includes a gel, powder or tape for protection from \_\_\_\_\_\_\_\_\_\_.
- A. Pulling friction
- B. Fiber abrasion
- C. Lightning strikes
- D. Moisture
Answer: D
NEW QUESTION # 99
FDDI and Token Ring networks used a \_\_\_\_\_\_\_\_\_\_\_ architecture.
- A. Star
- B. Bus
- C. Balanced
- D. Ring
Answer: D
NEW QUESTION # 100
What UTP installation tool is needed for teminating most Cat 5e/6 jacks?
- A. Crimper
- B. Punchdown tool with 110 blade
- C. Punchdown tool with 66 blade
- D. Spudger
Answer: B
NEW QUESTION # 101
Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Preparing cables for splicing in splice closures requires __________.
- A. Securing the cable properly at the closure entrance
- B. Leaving the proper length of buffer tubes from the cable entrance in the closure to the splice tray
- C. Careful cleaning of all fibers
- D. Leaving the proper length of fiber to splice and fit the splice in the splice tray
Answer: A,B,C,D
NEW QUESTION # 102
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.
- A. 1/2 inch or 13 mm
- B. 3 in or 75 mm
- C. 1 inch or 25 mm
- D. 2 in or 50 mm
Answer: A
NEW QUESTION # 103
The \_\_\_\_\_\_\_\_\_\_ protects the fiber from harm.
- A. Aramid fiber strength members
- B. Jacket
- C. All of the above
- D. Primary buffer coating
Answer: C
NEW QUESTION # 104
What copper cable types are included in the TIA-568 structured cabling standards?
- A. UTP (unshielded twisted pair), STP (shielded twisted pair) and coax
- B. Any communications cable
- C. UTP (unshielded twisted pair), ScTP (screened twisted pair) and STP (shielded twisted pair)
- D. UTP (unshielded twisted pair) and coax
Answer: C
NEW QUESTION # 105
Wireless networks are really used to replace ________.
- A. The patchcord that connects a PC to a wall outlet connection
- B. Structured cabling
- C. Backbone cabling
- D. Routers
Answer: A
NEW QUESTION # 106
The diameter of the core in OM2 and OM3 multimode fiber is how large?
- A. 9 mm
- B. 50 microns
- C. 62.5 microns
- D. 62.5 mm
Answer: B
NEW QUESTION # 107
......
100% Free OSP-002 Daily Practice Exam With 170 Questions: https://www.lead2passed.com/BICSI/OSP-002-practice-exam-dumps.html
Pass OSP-002 Review Guide, Reliable OSP-002 Test Engine: https://drive.google.com/open?id=1EQTUxe0JXyItOCZzqy4NV9Vwgg2VKLCK
