Free 5V0-22.23 Exam Study Guide for the NEW [Jan-2024] Dumps Test Engine
5V0-22.23 PDF Dumps Extremely Quick Way Of Preparation
The VMware 5V0-22.23 exam consists of 60 questions and has a time limit of 105 minutes. The format of the exam is multiple-choice, drag and drop, and matching. The passing score for this certification is 300/500. Candidates who pass 5V0-22.23 exam will obtain the VMware vSAN Specialist (v2) certification and demonstrate their expertise in virtualized environments.
VMware 5V0-22.23 certification exam is designed for professionals who want to demonstrate their expertise in VMware vSAN technology. 5V0-22.23 exam is intended for individuals who are responsible for designing, deploying, managing and troubleshooting vSAN solutions in a VMware vSphere environment. VMware vSAN Specialist (v2) certification is recognized globally and can help professionals enhance their career prospects in the IT industry.
VMware vSAN Specialist (v2) certification exam is a great opportunity for IT professionals to validate their expertise in vSAN technologies. Passing 5V0-22.23 exam will demonstrate a candidate's ability to design, implement, and manage vSAN solutions in a VMware environment. With the help of VMware's study materials and practice exams, candidates can prepare for 5V0-22.23 exam and take their careers to the next level.
NEW QUESTION # 39
A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule
"Failures to tolerate" set to "1 failure - RAID-5 (Erasure Coding)" is assigned. A vSAN administrator has changed the rule in the assigned policy to "2 failures - RAID-6 (Erasure Coding)".
What is the result of this change?
- A. No changes occur until the policy is reapplied.
- B. The updated policy is serially applied to the virtual machines.
- C. The policy change is rejected immediately.
- D. The changes are queued for 60 minutes.
Answer: B
Explanation:
Explanation
The updated policy is serially applied to the virtual machines is the correct answer because changing the rule in the assigned policy will trigger a policy compliance check and a resynchronization of the affected objects.
The policy change will not be rejected, queued, or ignored, as it is a valid and supported operation. However, the policy change will not be applied in parallel, as that would cause too much network and disk traffic.
Instead, the policy change will be applied one virtual machine at a time, starting with the most critical ones, until all virtual machines are compliant with the new policy. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 9
NEW QUESTION # 40
After a planned power outage, an administrator decided to restart the vSAN cluster manually.
What is the correct sequence of steps for the administrator to follow after powering on the ESXi hosts?
- A. 1. Exit all hosts from maintenance mode.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Enable cluster member updates from vCenter Server on all ESXi hosts. - B. 1. Enable cluster member updates from vCenter Server on all ESXi hosts.
2. Run the python reboot helper script on all ESXi hosts to recover the cluster.
3. Exit all hosts from maintenance mode. - C. 1. Exit all hosts from maintenance mode.
2. Enable cluster member updates from vCenter Server only on one ESXi host.
3. Run the python reboot helper script only on one ESXi host to recover the cluster. - D. 1. Enable cluster member updates from vCenter Server only on one ESXi host.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Exit all hosts from maintenance mode.
Answer: D
Explanation:
Explanation
This is the sequence of steps recommended by VMware for manually restarting the vSAN cluster after a planned power outage. The steps are as follows:
Enable cluster member updates from vCenter Server only on one ESXi host. This will allow the host to receive the latest cluster membership information from vCenter Server and avoid any conflicts or inconsistencies with other hosts. The command to enable cluster member updates is esxcfg-advcfg -s 1
/VSAN/IgnoreClusterMemberListUpdates.
Run the python reboot helper script only on one ESXi host to recover the cluster. This will prepare the cluster for a manual restart by partitioning the cluster and ensuring that all hosts have consistent metadata. The command to run the python reboot helper script is python
/usr/lib/vmware/vsan/bin/reboot_helper.py prepare.
Exit all hosts from maintenance mode. This will allow the hosts to resume normal operations and join the vSAN cluster. The command to exit maintenance mode is esxcli system maintenanceMode set -e false.
The other options are incorrect for the following reasons:
B, exit all hosts from maintenance mode, run the python reboot helper script only on one ESXi host to recover the cluster, and enable cluster member updates from vCenter Server on all ESXi hosts, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information. Enabling cluster member updates from vCenter Server on all ESXi hosts is also unnecessary and can cause conflicts or inconsistencies with other hosts.
C, exit all hosts from maintenance mode, enable cluster member updates from vCenter Server only on one ESXi host, and run the python reboot helper script only on one ESXi host to recover the cluster, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information.
D, enable cluster member updates from vCenter Server on all ESXi hosts, run the python reboot helper script on all ESXi hosts to recover the cluster, and exit all hosts from maintenance mode, is incorrect because enabling cluster member updates from vCenter Server on all ESXi hosts is unnecessary and can causeconflicts or inconsistencies with other hosts. Running the python reboot helper script on all ESXi hosts concurrently can also cause a race condition that can result in unexpected outcomes.
References:
Manually Shut Down and Restart the vSAN Cluster
Restart the vSAN Cluster
NEW QUESTION # 41
A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
- B. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
- C. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- D. It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.
Answer: C
Explanation:
Explanation
To upgrade the vSAN environment from vSAN 7.0 U3 to vSAN 8.0 using vLCM in a non-internet connected environment, the administrator should configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository. UMDS stands for Update Manager Download Service, which is a component of vSphere Lifecycle Manager that can be used to download patches and updates for ESXi hosts, virtual appliances, and VMware Tools from the VMware online depot and store them in a shared repository. The administrator can then configure the vSphere Lifecycle Manager to use the UMDS-shared repository as a custom depot for patching and upgrading the vSAN cluster. This option allows the administrator to perform offline upgrades without requiring internet access for the vSAN cluster12 References: 1: VMware vSphere Lifecycle Manager Administration, page 22 2: VMware vSphere Update Manager Download Service, page 5
NEW QUESTION # 42
A vSAN administrator is responsible for managing a customer's production vSAN cluster that is going to be used to provide SMB file shares to a number of host clients. The vSAN administrator must take action so the performance of all services in the production vSAN cluster can be monitored.
Which two services must be enabled for this monitoring to occur? (Choose two.)
- A. iSCSI Target Service
- B. vSAN Health Service
- C. vSAN Performance Service
- D. vSAN File Services
- E. vSAN Performance Diagnostic Service
Answer: C,D
Explanation:
Explanation
To monitor the performance of vSAN File Services, the vSAN administrator must enable both the vSAN File Services and the vSAN Performance Service. The vSAN File Services provides SMB file shares to host clients, while the vSAN Performance Service collects and analyzes performance statistics and displays them in the vSphere Client. The other services are not related to vSAN File Services performance monitoring.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 9, Objective 7.4; [vSAN File Services];
[vSAN Performance Service]
NEW QUESTION # 43
A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.
Which would satisfy the customer's requirement?
- A. Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4
- B. Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA
- C. Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration
- D. Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design
Answer: D
Explanation:
Explanation
Deploying the application on a new cluster with vSAN 8.0 ESA using a new hardware design is the correct answer because it will satisfy the customer's requirement for low latency. vSAN 8.0 ESA is a new architecture that uses a storage pool configuration where all disks are treated as capacity disks and use a new algorithm to distribute data across them. This improves the I/O flow, reduces the write amplification, and eliminates the cache tier bottleneck. Using a new hardware design with all-flash disks or NVMe disks will further enhance the performance and latency of the application, as these disks have faster read and write speeds than hybrid disks. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additionalstripe width of 4, deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration, and performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA are not valid or optimal solutions for this scenario. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4 will increase the resiliency and availability of the data, but it will also increase the network traffic, disk space consumption, and parity calculation overhead, which will negatively affect the latency and performance of the application. Deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration will not improve the latency significantly, as vSAN 8.0 OSA still uses the same disk group configuration as vSAN 7.0 U2 OSA, where one disk is designated as a cache disk and the rest are capacity disks. The cache disk can still become a bottleneck for high-performance applications, especially if it is not an SSD or NVMe disk. Performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA is not possible, as vSAN ESA requires a different hardware design than vSAN OSA. The existing disk groups need to be deleted and all disks need to be erased before switching to vSAN ESA. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 6
What's New in VMware vSAN 8.0
NEW QUESTION # 44
The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.
Which two actions would cause this situation? (Choose two.)
- A. HA Virtual Machine Monitoring forced a VM to reboot.
- B. DRS is relocatingVMs between vSAN nodes.
- C. VM snapshot is being deleted.
- D. A change to the storage policy is applied to the objects.
- E. A host failure occurs in the cluster
Answer: D,E
Explanation:
Explanation
Two actions that would cause some objects to be currently resyncing are:
A change to the storage policy is applied to the objects. This action triggers a resynchronization of objects to make them compliant with the new policy settings, such as FTT, RAID level, stripe width, etc. The resynchronization process copies data from one host to another to create or update replicas or parity segments.
A host failure occurs in the cluster. This action causes some objects to become non-compliant with their storage policy, as they lose one or more replicas or parity segments due to the host failure. The resynchronization process rebuilds the missing components on other hosts in the cluster to restore compliance and availability.References: : VMware vSphere Storage Guide, page 129 : Monitor the Resynchronization Tasks in the vSAN Cluster 1 : VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 45
Which VMware solution requires vSAN usage?
- A. VMware Telco Cloud Automation
- B. VMware Aria Automation
- C. VMware Horizon
- D. VMware Cloud Foundation
Answer: D
Explanation:
Explanation
The VMware solution that requires vSAN usage is VMware Cloud Foundation. VMware Cloud Foundation is an integrated software stack that bundles compute virtualization (VMware vSphere), storage virtualization (VMware vSAN), network virtualization (VMware NSX), and cloud management and monitoring (VMware vRealize Suite) into a single platform that can be deployed on premises or as a service within a public cloud.
VMware Cloud Foundation relies on vSAN as the primary storage solution for its workload domains, which are logical pools of resources that can be used to run different types of workloads. The other options are not correct. VMware Horizon, VMware Telco Cloud Automation, and VMware Aria Automation are VMware solutions that do not require vSAN usage, although they can benefit from it. VMware Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, and it can use any supported storage solution, including vSAN. VMware Telco Cloud Automation is a cloud-native orchestration and automation platform that enables communication service providers to accelerate the deployment and lifecycle management of network functions and services across any network and cloud. It can use any supported storage solution, including vSAN. VMware Aria Automation is not a valid VMware solution name.
References: VMware Cloud Foundation Overview; VMware Horizon Overview; VMware Telco Cloud Automation Overview
NEW QUESTION # 46
What is the purpose of host rebuild reserve in vSAN?
- A. Reserves space for internal operations
- B. Allocates capacity for vCLS
- C. Reserves space in case of single host failure
- D. Stores vSphere HA heartbeats
Answer: C
Explanation:
Explanation
The host rebuild reserve is a feature that allows vSAN to reserve space in the cluster for vSAN to be able to repair in case of a single host failure. This reservation is set to one host worth of capacity, which means that if one host in the vSAN cluster fails and no longer contributes storage, there is still sufficient capacity remaining in the cluster to rebuild and re-protect all vSAN objects. This feature prevents the creation of new VMs or powering on VMs if such operations consume the reserved space. By default, the host rebuild reserve is disabled, but it can be enabled in the vSAN Services configuration. The other options are not related to the hostrebuild reserve. References: vSAN Capacity Management in v7.0U1; Configure Reserved Capacity
NEW QUESTION # 47
What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)
- A. Change the Object Space Reservation to 100.
- B. The VM quest operating system supports ATA TRIM or SCSI UNMAP capability
- C. TRIM and UNMAP is enabled.
- D. The vSAN cluster is an all-flash architecture.
- E. Deduplication and compression are enabled.
Answer: C,D
Explanation:
Explanation
The two prerequisites for using the TRIM and UNMAP capability of vSAN are:
B: The vSAN cluster is an all-flash architecture. TRIM and UNMAP are only supported on all-flash vSAN clusters, as they can reclaim space from flash devices that use thin provisioning. TRIM and UNMAP are not supported on hybrid vSAN clusters, as they cannot reclaim space from magnetic disks that use thick provisioning1.
D: TRIM and UNMAP is enabled. TRIM and UNMAP are disabled by default in vSAN, as they might have a performance impact on some workloads. To enable TRIM and UNMAP on a vSAN cluster, the administrator must use the following RVC command: vsan.unmap_support -enable2. After enabling TRIM and UNMAP, the administrator must power off and then power on all VMs that use the vSAN datastore.
NEW QUESTION # 48
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?
- A. Enable deduplication and compression
- B. Distribute servers across at least two different racks and configure two fault domains
- C. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks
- D. Distribute servers across at least three different racks and configure three fault domains
Answer: D
Explanation:
Explanation
To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:
Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4 Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 49
A vSAN administrator needs to enable vSAN ESA.
Which two requirements need to be met? (Choose two.)
- A. vSAN Advanced license
- B. vSAN Witness Appliance
- C. vSAN Build Your Own configuration
- D. vSAN Standard license
- E. vSAN ReadyNodes configuration
Answer: D,E
Explanation:
Explanation
To enable vSAN ESA, two requirements that need to be met are: vSAN Standard license or higher, and vSAN ReadyNodes configuration. vSAN Standard license or higher is required to use vSAN ESA, as it is a feature that is only available in vSAN 8.0 or later versions. vSAN ESA is an optional, alternative architecture to vSAN OSA that is designed to process and store data with higher efficiency, scalability, and performance.
vSAN ReadyNodes configuration is required to use vSAN ESA, as it is a hardware configuration that is pre-configured, tested, and certified for VMware Hyper-Converged Infrastructure Software. Each vSAN ReadyNode is optimally configured for vSAN ESA with the required amount of CPU, memory, network, and storage NVMe devices. The other options are not correct. vSAN Build Your Own configuration is not supported for vSAN ESA, as it might not meet the hardware requirements or compatibility for vSAN ESA.
vSAN Witness Appliance is not required to use vSAN ESA, as it is only needed for stretched cluster or two-node cluster configurations. References: vSAN Express Storage Architecture; vSAN ReadyNode Hardware Guidance
NEW QUESTION # 50
A host in a vSAN stretched cluster goes offline during an unplanned event.
Which action will be triggered from AQC on the vSAN cluster?
- A. AQC will create a vSAN alarm.
- B. AQC will recalculate the quorum on an object.
- C. AQC will restart the VMs that went offline.
- D. AQC will trigger a vMotion of VMs that went offline.
Answer: B
Explanation:
Explanation
When a host in a vSAN stretched cluster goes offline, vSAN will use Adaptive Resync to recalculate the quorum on an object. Quorum is the minimum number of votes that an object needs to be available. For example, a RAID-1 object with two data components and one witness component needs two votes out of three to be available. If one data component goes offline, the object still has quorum and is available. However, if both data components go offline, the object loses quorum and is unavailable. Adaptive Resync will adjust the quorum requirement based on the availability of components and fault domains. For example, if one fault domain goes offline, Adaptive Resync will lower the quorum requirement to one vote out of two, so that the object can remain available with one data component and one witness component. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 18
NEW QUESTION # 51
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleague inquires about the Operations Reserve option.
What is the purpose of using this option?
- A. Provides space for internal operations
- B. Configures space for external operations
- C. Allocates space forvSAN uparades
- D. Reserves space for tolerating failures
Answer: A
Explanation:
Explanation
The purpose of using the Operations Reserve option in the vSAN ReadyNode Sizer is to provide space for internal operations such as deduplication, compression, encryption, snapshots, clones, and rebalancing. The Operations Reserve is calculated as a percentage of the total usable capacity of the vSAN cluster. The default value is 30%, but it can be adjusted based on the expected workload characteristics and data services requirements. The other options are not correct, as they do not describe the Operations Reserve option. Configuring space for external operations, reserving space for tolerating failures, and allocating space for vSAN upgrades are not part of the Operations Reserve option. References: 2, section 2; , section 3
NEW QUESTION # 52
A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:
* Physical adapters share capacity among several traffic types
* Guaranteed bandwidth for vSAN during bandwidth contention
* Enhanced security
Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)
- A. Utilize Network I/O Control
- B. Create static routes between the vSAN hosts
- C. Use IOPS Limit rules in storaqe policies
- D. Isolate vSAN traffic in a VLAN
- E. Enable jumbo frames
Answer: A,D
Explanation:
Explanation
Utilizing Network I/O Control and isolating vSAN traffic in a VLAN are the two actions that should be taken to configure the new vSAN cluster to meet the requirements. Network I/O Control allows the vSAN administrator to create network resource poolsand assign bandwidth shares or reservations to different traffic types, such as vSAN, vMotion, or management. This ensures that vSAN traffic has guaranteed bandwidth during contention and can achieve better performance and availability. Isolating vSAN traffic in a VLAN enhances the security of the cluster by preventing unauthorized access or interference from other network segments. It also simplifies the network configuration and management by reducing the broadcast domain and avoiding IP address conflicts. Creating static routes between the vSAN hosts, using IOPS Limit rules in storage policies, and enabling jumbo frames are not necessary or recommended actions for this scenario. Static routes are not required for vSAN communication, as vSAN uses multicast or unicast depending on the version and configuration. IOPS Limit rules are used to limit the IOPS allocated to an object, which can degrade the performance and latency of the application. Jumbo frames can improve the network efficiency and throughput, but they are not mandatory for vSAN and require consistent configuration across all network devices.
References:
Network I/O Control
vSAN Network Design Guide
NEW QUESTION # 53
An organization wants to implement a virtual desktop infrastructure (VDI) solution on their vSAN storage.
They also need to store their applications running inside the VDI environment on vSAN storage.
Which two end-user computing (EUC) solutions could be implemented to satisfy the requirements of the organization? (Choose two.)
- A. Agp_ Volumes
- B. Dynamic Environment Manager
- C. Horizon
- D. Workspace ONE UEM
- E. Workspace ONE Access
Answer: B,C
Explanation:
Explanation
Horizon and Dynamic Environment Manager are two end-user computing (EUC) solutions that can be implemented on vSAN storage to provide a virtual desktop infrastructure (VDI) solution and store applications running inside the VDI environment. Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, while Dynamic Environment Manager is a tool that provides personalization and dynamic policy configuration across any virtual, physical, and cloud-based Windows desktop environment. The other solutions are not directly related to VDI or application storage on vSAN.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 8, Objective 3.5; [Horizon]; [Dynamic Environment Manager]
NEW QUESTION # 54
An administrator has deployed a new vSAN OSA cluster that contains eight hosts and needs to configure a storage policy for the currently deployed database virtual machines. The requirements state that if two hosts in the vSAN OSA cluster fail, all virtual machines are unaffected.
Which RAID configuration must the administrator use in this storage policy to achieve the best performance for the database virtual machines?
- A. RA1D-1
- B. RAID-5
- C. RAID-0
- D. RAID-6
Answer: A
Explanation:
Explanation
To achieve the best performance for the database virtual machines and tolerate two host failures in a vSAN OSA cluster, the administrator must use RAID-1 as the RAID configuration in the storage policy. RAID-1 is a mirroring technique that creates multiple replicas of each object across different hosts. RAID-1 provides the best performance among the available RAID configurations, as it does not involve any parity calculations or stripe splitting. To tolerate two host failures, the administrator must set the Failures to Tolerate (FTT) policy to
2, which means that each object will have three replicas. The other options are not correct. RAID-5 and RAID-6 are erasure coding techniques that split each object into data segments and parity segments across different hosts. RAID-5 can tolerate one host failure, while RAID-6 can tolerate two host failures. However, both RAID-5 and RAID-6 have lower performance than RAID-1, as they involve more complex calculations and network traffic. RAID-0 is a striping technique that splits each object into multiple stripes across different hosts. RAID-0 does not provide any data redundancy or fault tolerance, and therefore cannot tolerate any host failure. References: RAID Configurations, FTT, and Host Requirements; RAID 5 or RAID 6 Design Considerations
NEW QUESTION # 55
A vSAN administrator has recently upgraded a vSAN cluster to 8.0 OSA and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?
- A. The used space on vSAN datastore exceeds the suggested host rebuild threshold.
- B. The physical disk has reached an 80% full reactive rebalance threshold.
- C. The used space on vSAN datastore exceeds the suggested slack rebuild threshold.
- D. Underutilized space is above 25-30% of the total capacity threshold.
Answer: C
Explanation:
Explanation
The Capacity Reserve feature in vSAN 8.0 OSA reduces the amount of capacity reserved for transient and rebuild operations by using a slack space threshold. This threshold is calculated based on the size of the largest component in the cluster and the number of failures to tolerate. If the used space on vSAN datastore exceeds the suggested slack space threshold, the feature will not operate properly and vSAN will revert to using the host rebuild reserve threshold. The other scenarios will not affect the Capacity Reserve feature. References:
[VMware vSAN Specialist v2 EXAM 5V0-22.23], page 28
NEW QUESTION # 56
......
Enhance your career with 5V0-22.23 PDF Dumps - True VMware Exam Questions: https://www.lead2passed.com/VMware/5V0-22.23-practice-exam-dumps.html
Download 5V0-22.23 Dumps (2024) - Free PDF Exam Demo: https://drive.google.com/open?id=1THvEt0TsXtTK_GWo_j4_Mk8Q3dRMbf28
