Latest NACE-CIP2-001 Pass Guaranteed Exam Dumps with Accurate & Updated Questions
NACE-CIP2-001 Exam Brain Dumps - Study Notes and Theory
NEW QUESTION # 22
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Comparable to air blast cleaning
- B. The same as air blast cleaning
- C. Different than air blast cleaning
- D. Slightly different to air blast cleaning
Answer: B
NEW QUESTION # 23
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. a), b) and c)
- B. Move the nozzle quicker
- C. Increase the standoff distance
- D. Lower the blast pressure
Answer: A
NEW QUESTION # 24
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. avoid repetitive blasting/coating operations.
- C. allow the contractor to guarantee the completion date.
- D. reduce the possibility of missing the recoat window.
Answer: A
NEW QUESTION # 25
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Verbally challenge the NCR
- B. Consult your supervisor
- C. Review the NCR with the other Inspector
- D. Request a re-blast of the item in question
Answer: B
NEW QUESTION # 26
A reinforced coating is
- A. equally resistant to movement and impact as a non-reinforced coating.
- B. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to abrasion and impact as a non-reinforced coating.
Answer: C
NEW QUESTION # 27
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Concrete
- B. Heat-shrink sleeves
- C. Coal Tar Enamel
- D. Liquid epoxies
Answer: D
NEW QUESTION # 28
Application of Thermal Spray Coatings requires:
- A. No particular skills
- B. The same skills as liquid coatings
- C. Specialized skills supported by training and experience
- D. The same skills as welding
Answer: C
NEW QUESTION # 29
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its temperature
- B. provide worker comfort.
- C. raise its relative humidity.
- D. lower its dew point,
Answer: D
NEW QUESTION # 30
Inspector reports should always be copied to:
- A. All parties involved in the project
- B. The Contractor and Owner
- C. The Owner only
- D. Whomever the Owner identifies
Answer: D
NEW QUESTION # 31
NACE International Standards are developed by:
- A. Government mandates
- B. Standard committees
- C. International mandates
- D. Regional mandates
Answer: B
NEW QUESTION # 32
All of these are advantages of using repair patches EXCEPT
- A. inert to common acids, alkalis, and solvents.
- B. special tools or equipment are required.
- C. excellent abrasion resistance.
- D. barrier to moisture and corrosion.
Answer: B
NEW QUESTION # 33
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. coatings are expected to degrade over time.
- B. linings protect the contents and the container.
- C. linings are more durable than coatings.
- D. coatings are more durable than linings.
Answer: B
NEW QUESTION # 34
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Mandatory
- B. Consensus
- C. De facto
- D. Voluntary
Answer: D
NEW QUESTION # 35
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. urethanes.
- B. powder coatings.
- C. epoxies.
- D. inorganic zincs.
Answer: D
NEW QUESTION # 36
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. True
- B. False
Answer: A
NEW QUESTION # 37
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:
- A. Method A - Cross Hatch
- B. Method A - X Cut
- C. Method B - X cut
- D. Method B - Cross Hatch
Answer: B
NEW QUESTION # 38
Galvanizing performs best in which of the following exposures:
- A. pH of 13
- B. pH between 5-10
- C. pH below 4
- D. pH above 12
Answer: B
NEW QUESTION # 39
You can use magnifiers to examine all of the following EXCEPT
- A. Surface cleanliness
- B. Blisters
- C. Surface profile
- D. Mill scale
Answer: A
NEW QUESTION # 40
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Advise the prospective employer that you cannot accept the position
- B. Meet with the prospective employer to scope of your role
- C. Accept assignment without hesitation
- D. Review the NACE Attestation prior to making a decision
Answer: D
NEW QUESTION # 41
Antifouling coatings are regulated by international treaties.
- A. True
- B. False
Answer: A
NEW QUESTION # 42
When performing inspection in accordance with ASTM D 4138 the Inspector will use:
- A. A hardness tester
- B. A destructive paint inspection Tooke gauge
- C. A set of 14 pencils of varying hardness
- D. A mechanical adhesion tester
Answer: B
NEW QUESTION # 43
NACE Level 2 Inspectors have been authorized to perform:
- A. All types of inspection without supervision
- B. Visual inspection only
- C. Visual inspection, Non-Destructive and Destructive testing
- D. Visual inspection and Non-destructive testing
Answer: C
NEW QUESTION # 44
......
Pass NACE NACE-CIP2-001 Test Practice Test Questions Exam Dumps: https://www.lead2passed.com/NACE/NACE-CIP2-001-practice-exam-dumps.html
The Best CIP Level 2 Study Guide for the NACE-CIP2-001 Exam: https://drive.google.com/open?id=1XveMuZqNaQ-6F5PgAlWsdKFz_YYjBo-u
