Pass Cisco 300-435 exam questions - convert Test Engine to PDF
Pass Your 300-435 Exam Easily - Real 300-435 Practice Dump Updated Jul 06, 2023
NEW QUESTION # 30
Fill in the blank to complete the statement.
Answer:
Explanation:
Zero touch provisioning (ZTP)
NEW QUESTION # 31
When working with MV Sense APIs, which type of protocol is MQTT based upon?
- A. publish-subscribe messaging protocol
- B. computer vision protocol
- C. simple mail transport protocol
- D. heavyweight messaging protocol
Answer: A
Explanation:
Reference:
https://internetofthingsagenda.techtarget.com/definition/MQTT-MQ-Telemetry-Transport
NEW QUESTION # 32
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.
Answer:
Explanation:
NEW QUESTION # 33
Refer to the exhibit. Which device type is functioning in a degraded state?
- A. access switch
- B. wireless LAN controller
- C. distribution switch
- D. access point
Answer: B
NEW QUESTION # 34
On which device is the Cisco SD-WAN manage certificate management API able to install certificates?
- A. CSR 1O00v
- B. vSmart
- C. vFog router
- D. load balancer
Answer: D
NEW QUESTION # 35
Which function is available in NETCONF and unavailable in RESTCONF?
- A. configuration changes are automatically activated
- B. validates the content of a candidate datastore
- C. supports JSON and data encoding
- D. uses the YANG data models to communicate
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/169/b_169_programmability_cg/configuring_yang_datamodel.html
NEW QUESTION # 36
What is a capability of MV Sense MQTT API?
- A. create email alerts for user that violate the security configuration
- B. request and subscribe to historical, current, or real-time data
- C. monitor the network and auto adjust for optimal performance
- D. automate the configuration of networking devices
Answer: B
NEW QUESTION # 37
Fill in the blank to complete the URL for an API call to Cisco SD-WAN to display the history of the Bidirectional Forwarding Detection sessions that run on a vEdge router.
Answer:
Explanation:
bfd/synced/sessions?
Explanation
https://vmanage-ip-address/dataservice/device/bfd/synced/sessions?deviceId=deviceId
NEW QUESTION # 38
A customer has several remote sites connected with the HQ via microwave links. An engineer has been asked to propose a backup WAN connectivity for these sites with these requirements:
Physical WAN connectivity is not available for most of these sites.
A low-cost and fast-to-implement backup solution must be deployed.
Bandwidth needs for the backup link are low.
Users can tolerate a WAN outage of up to 2 hours.
Which backup WAN link type does the engineer recommend?
- A. 802.16 WiMAX
- B. 802.15.1 Bluetooth
- C. laser link
- D. LTE
Answer: D
NEW QUESTION # 39
During a network outage, a network administrator used the Cisco SD-WAN vManage Troubleshooting Dashboard APIs to troubleshoot the cause of the issue. Which detail is captured during troubleshooting with these APIs?
- A. public cloud resources
- B. connections summary
- C. OMP connection health
- D. VPN health
Answer: B
NEW QUESTION # 40
Which statement describe the difference between OpenConfig and native YANG data models?
- A. OpenConfig models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
- B. Native models are developed by individual developers and designed to apply configurations on platforms.
- C. Native models are designed to be independent of the underlying platform and are developed by vendors and standards bodies, such as the IETF.
- D. Native models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-741518.html
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-741518.html
NEW QUESTION # 41
A programmer is creating a Meraki webhook python script to send a message to webex teams. Which two elements should be configured to create this script? (Choose two.)
- A. Webhook server secret
- B. User authentication count
- C. XML formatted request
- D. Webex teams access token
- E. gRPC credentials
Answer: A,D
NEW QUESTION # 42
DRAG DROP
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.
Select and Place:
Answer:
Explanation:
Section: Cisco DNA Center
Explanation/Reference: https://developer.cisco.com/docs/dna-center/#!using-id-values-in-rest-requests
NEW QUESTION # 43
Which function is available in NETCONF and unavailable is RESTCONF?
- A. Configuration changes are automatically activated.
- B. Support JSON and data encoding.
- C. Uses the YANG data models to communicate.
- D. Validates the content of a candidate datastore.
Answer: C
NEW QUESTION # 44
When working with MV Sense APLS , upon which type of protocol is MQTT based?
- A. heavyweight messaging
- B. simple mail transport
- C. computer vision
- D. publish-subscribe messaging
Answer: D
NEW QUESTION # 45
Which statement describe the difference between OpenConfig and native YANG data models?
- A. OpenConfig models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
- B. Native models are developed by individual developers and designed to apply configurations on platforms.
- C. Native models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
- D. Native models are designed to be independent of the underlying platform and are developed by vendors and standards bodies, such as the IETF.
Answer: D
NEW QUESTION # 46
A new project called "device_status" must be stored in a central Git repository called "device_status" with the first file named "device_status.py". The Git repository is created using the account python_programmer. Which set of commands inserts the project into Git?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
Explanation:
Reference:
https://help.github.com/en/github/importing-your-projects-to-github/adding-an-existing-project-togithub-using-the-command-line
https://help.github.com/en/github/importing-your-projects-to-github/adding-an-existing-project-togithub-using-the-command-line
NEW QUESTION # 47
Which REST endpoint is used to create a Cisco Meraki network?
- A. PUT /organizations/{organizationId}/networks
- B. POST /networks{networkId}
- C. POST /organizations/{organizationId}/networks
- D. PATCH /networks{networkId}
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. json
- B. yang.data+json
- C. yang +json
- D. yang-data+json
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
NEW QUESTION # 49
Refer to the exhibit.
Which type of YANG container is described by the JSON instance provided?
- A. interface-name
- B. interface-configurations
- C. description
- D. active
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
NEW QUESTION # 50
Drag and drop the code from the bottom onto the box where the code is missing to perform the login operation and security check on the vManage web server at the specified IP address. Not all code options are used.
Answer:
Explanation:
NEW QUESTION # 51
Refer to the exhibit.
Which ncclient method is used to collect the running configuration of a Cisco IOS XE device that uses NETCONF?
- A. config=m.copy_config(source='running')
- B. config=m.collect_config(source='running')
- C. config=m.get(source='running')
- D. config=m.get_config(source='running')
Answer: D
NEW QUESTION # 52
An engineer needs to create a new network using the Meraki API. Which HTTP action to the URL https://
api.meraki.com/api/v0/organizations/<new_org_id>/networks will result in a 201 response code?
- A. PUT
- B. POST
- C. ADD
- D. GET
Answer: B
NEW QUESTION # 53
Drag and drop the code from the bottom onto the box where the code is missing to construct a Python script to automate the process of updating the site-to-site VPN settings of the network. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 54
......
300-435 Real Exam Questions and Answers FREE: https://www.lead2passed.com/Cisco/300-435-practice-exam-dumps.html
2023 Realistic Verified Free Cisco 300-435 Exam Questions: https://drive.google.com/open?id=1Jcx6n1CiIQW9lEdbyBVf2vVme4HCAkGk
