Updated Nov-2024 Pass 300-715 Exam - Real Practice Test Questions
Download Free Cisco 300-715 Real Exam Questions
Cisco 300-715 Certification Exam is a comprehensive test that covers a wide range of topics related to ISE deployment, configuration, and management. Candidates are expected to have a solid understanding of network security principles, access control policies, and authentication and authorization protocols. They must also be able to troubleshoot common ISE-related issues and have a good understanding of network infrastructure components such as switches, routers, and firewalls. Passing the Cisco 300-715 exam is an important milestone for IT professionals looking to advance their careers in network security and access control.
NEW QUESTION # 108
An administrator is configuring the Native Supplicant Profile to be used with the Cisco ISE posture agents and needs to test the connection using wired devices to determine which profile settings are available. Which two configuration settings should be used to accomplish this task? (Choose two.)
- A. security
- B. certificate template
- C. allowed protocol
- D. proxy host/IP
- E. authentication mode
Answer: B,C
NEW QUESTION # 109
A laptop was stolen and a network engineer added it to the block list endpoint identity group What must be done on a new Cisco ISE deployment to redirect the laptop and restrict access?
- A. Ensure that access to port 8443 is allowed within the ACL.
- B. Select DROP under If Auth fail within the authentication policy.
- C. Select DenyAccess within the authorization policy.
- D. Ensure that access to port 8444 is allowed within the ACL.
Answer: B
NEW QUESTION # 110
An engineer must develop a policy that utilizes AD group membership on Cisco ISE. Which type of policy element must the engineer configure to create an AD group within a policy?
- A. results
- B. dictionaries
- C. conditions
- D. smart conditions
Answer: C
NEW QUESTION # 111
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Use a compound condition to look for the Windows or Mac native firewall applications.
- B. Use the file registry condition to ensure that the firewal is installed and running appropriately.
- C. Enable the default rewall condition to check for any vendor rewall application.
- D. Enable the default application condition to identify the applications installed and validade the rewall app.
Answer: C
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION # 112
A network administrator must use Cisco ISE to check whether endpoints have the correct version of antivirus installed Which action must be taken to allow this capability?
- A. Create a Cisco AnyConnect configuration within Cisco ISE for the Compliance Module and associated configuration files
- B. Create a Cisco AnyConnect Network Visibility Module configuration profile to send the antivirus information of the endpoints to Cisco ISE.
- C. Configure a native supplicant profile to be used for checking the antivirus version
- D. Configure Cisco ISE to push the HostScan package to the endpoints to check for the antivirus version.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_client_prov.html About Anyconnect Network Visibility Module
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect45/administration/guide/b_AnyConnect_Administrator_Guide_4-5/nvm.html
NEW QUESTION # 113
An engineer is starting to implement a wired 802.1X project throughout the campus. The task is for failed authentication to be logged to Cisco ISE and also have a minimal impact on the users. Which command must the engineer configure?
- A. authentication open
- B. pae dot1x enabled
- C. monitor-mode enabled
- D. authentication host-mode multi-auth
Answer: C
Explanation:
In the context of a wired 802.1X deployment with Cisco ISE, the requirement is to log failed authentications while minimizing user impact. Let's analyze each option:
A) authentication open - This command configures the port to allow network access regardless of the authentication state. It's useful in situations where specific devices can't perform 802.1X authentication but should still be allowed network access. However, it doesn't specifically address the logging of failed authentications.
B) pae dot1x enabled - PAE (Port Access Entity) refers to the entity on a network device that enforces access control. This command enables 802.1X on the port, which is a prerequisite for implementing 802.1X, but doesn't directly relate to logging failed authentication attempts.
C) authentication host-mode multi-auth - This command configures the port to allow multiple authenticated sessions. This mode is used when multiple devices are connected to the same port (like in a conference room). While it's relevant for 802.1X environments, it doesn't specifically cater to logging failed authentications or minimizing user impact.
D) monitor-mode enabled - This command is used in the context of 802.1X to enable Monitor Mode on a port. Monitor Mode allows a port to grant limited network access to endpoints without 802.1X capabilities. It's often used to ease the deployment of 802.1X by monitoring the authentication status without fully enforcing access control, thereby minimizing user impact. It also helps in logging authentication attempts, including failures.
NEW QUESTION # 114
Which two ports do network devices typically use for CoA? (Choose two )
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: A,B
Explanation:
Explanation
NEW QUESTION # 115
Which use case validates a change of authorization?
- A. Endpoints are created through device registration for the guests
- B. An endpoint that is disconnected from the network is discovered
- C. An endpoint profiling policy is changed for authorization policy.
- D. An authenticated, wired EAP-capable endpoint is discovered
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html
NEW QUESTION # 116
An administrator needs to give the same level of access to the network devices when users are logging into them using TACACS+.
However, the administrator must restrict certain commands based on one of three user roles that require different commands.
How is this accomplished without creating too many objects using Cisco ISE?
- A. Create multiple shell profiles and multiple command sets.
- B. Create one shell profile and one command set.
- C. Create multiple shell profiles and one command set
- D. Create one shell profile and multiple command sets.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html
https://www.youtube.com/watch?v=IlZwB71Szog&ab_channel=JasonMaynard
NEW QUESTION # 117
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication sessions method
- B. show authentication registrations
- C. show authentication sessions mac 000e.84af.59af details
- D. show authentication interface gigabitethemet2/0/36
Answer: C
NEW QUESTION # 118
Which default endpoint identity group does an endpoint that does not match any profile in Cisco ISE become a member of?
- A. whitelist
- B. endpoint
- C. profiled
- D. blacklist
- E. unknown
Answer: E
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html
NEW QUESTION # 119
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 120
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. aaa authentication dot1x default group radius
- B. dot1x system-auth-control
- C. dot1x pae authenticator
- D. authentication port-control auto
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/dot1x.html#wp1133395
NEW QUESTION # 121
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node.
Which persona should be configured with the largest amount of storage in this environment?
- A. Platform Exchange Grid
- B. policy Services
- C. Primary Administration
- D. Monitoring and Troubleshooting
Answer: D
NEW QUESTION # 122
A company is attempting to improve their BYOD policies and restrict access based on certain criteria. The company's subnets are organized by building.
Which attribute should be used in order to gain access based on location?
- A. static group assignment
- B. device registration status
- C. MAC address
- D. IP address
Answer: A
NEW QUESTION # 123
A network administrator must configura endpoints using an 802 1X authentication method with EAP identity certificates that are provided by the Cisco ISE When the endpoint presents the identity certificate to Cisco ISE to validate the certificate, endpoints must be authorized to connect to the network Which EAP type must be configured by the network administrator to complete this task?
- A. EAP-TLS
- B. EAP-TTLS
- C. EAP-FAST
- D. EAP-PEAP-MSCHAPv2
Answer: C
NEW QUESTION # 124
Which statement is not correct about the Cisco ISE Monitoring node?
- A. The local collector buffers transport the collected data to designated Cisco ISE Monitoring nodes as syslog; once Monitoring nodes are globally defined via Administration, ISE nodes automatically send logs to one or both of the configured Monitoring nodes.
- B. The local collector agent collects logs locally from itself and from any NAD that is configured to send logs to the Policy Service node.
- C. The local collector agent process runs only the Inline Posture node.
- D. Cisco ISE supports distributed log collection across all nodes to optimize local data collection, aggregation, and centralized correlation and storage.
Answer: C
NEW QUESTION # 125
Refer to the exhibit.
An engineer is configuring a client but cannot authenticate to Cisco ISE During troubleshooting, the show authentication sessions command was issued to display the authentication status of each port Which command gives additional information to help identify the problem with the authentication?
- A. show authentication sessions output
- B. show authentication sessions Interface Gil/0/1 output
- C. show authentication sessions
- D. show authentication sessions interface Gi1/0/1 details
Answer: D
NEW QUESTION # 126
......
Cisco 300-715 exam consists of 60-70 multiple-choice and simulation questions that must be completed within 90 minutes. 300-715 exam is designed to test the candidate's understanding of Cisco ISE concepts, including device administration, network access, and authentication and authorization. 300-715 exam also covers the deployment and configuration of Cisco ISE policies and the troubleshooting of common issues.
300-715 Dumps 100 Pass Guarantee With Latest Demo: https://www.lead2passed.com/Cisco/300-715-practice-exam-dumps.html
Pass Your Exam With 100% Verified 300-715 Exam Questions: https://drive.google.com/open?id=1iEkdmOQSxj0fhIubuN5F_v584rI4pONE
