New 2021 Guaranteed Success with Lead2Passed NS0-516 Dumps Network Appliance PDF Questions
Exceptional Practice To NetApp Implementation Engineer SAN Specialist E-Series (NCIE) Pass the First Time
NetApp NS0-516 Exam Certification Details:
| Exam Price | $150 USD |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Registration | PEARSON VUE |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Passing Score | 75% |
| Number of Questions | 60 |
| Duration | 90 minutes |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Sample Questions | NetApp NS0-516 Sample Questions |
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
NEW QUESTION 99
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Throughput
- B. I/O alignment
- C. IOPS
- D. Read modify write
- E. Parity
Answer: A
NEW QUESTION 100
A customer has an E-Series system with several expansion enclosures and can use the ______ to determine if the connections between the enclosures have been cabled correctly. (Choose the best answer.)
- A. Major Event Log
- B. Host Mappings tab
- C. Cable Connections report
- D. Recovery Guru
Answer: C
NEW QUESTION 101
What four resources have information to determine space and power & cooling requirements for E-Series storage systems? (Choose four.)
- A. Hardware Universe
- B. E-Series System Data Sheets
- C. Hardware cabling guide
- D. Install Guide
- E. Site Prep Guide
- F. E-Series Power & Cooling Calculator
Answer: B,D,E,F
NEW QUESTION 102
Exhibit:
Referring to the exhibit, which three statements are true? (Choose three)
- A. There are six SAS host ports available
- B. There are two FC/iSCSI host ports available
- C. There are four SAS host ports available
- D. There are two Base-T iSCSI ports available
- E. There are two SAS expansion ports available
Answer: B,C,E
NEW QUESTION 103
In which two locations would you find the WWPNs for a Windows host? (Choose two)
- A. Windows Device Manager
- B. FC switch
- C. HBA vendor's utility
- D. host's BIOS
Answer: B,C
NEW QUESTION 104
A customer has launched a data analytics initiative and has been transferring old data into the new data lake. The customer has discovered some data read errors during the transfer process.
In this scenario, how should the customer have avoided these data integrity issues?
- A. by turning on cyclic redundancy checks (CRCs)
- B. by ensuring that data assurance and media scan are always activated
- C. by deploying secure-capable drives
- D. by turning on erasure coding
Answer: B
NEW QUESTION 105
Based on this partitioning configuration, what volumes can Host Group Z "see"? (Volumes are color-coded for parti ions.)
- A. F, G, H
- B. E, F, H
- C. A, B, C
- D. B, C, G
Answer: D
NEW QUESTION 106
What does the storage system use to preserve cache data in the event of a complete controller failure? (Choose the best answer.)
- A. Cache mirroring
- B. Write caching
- C. Read caching
- D. Pre-fetch caching
- E. Flash read cache
Answer: A
NEW QUESTION 107
Which statement most accurately describes the benefits of ALUA?
- A. It causes an immediate ownership change of a volume whenever I/O uses an alternate path to the storage system.
- B. It ensures that controller ownership for a volume will not change.
- C. It sets the storage system to an active-active LUN access model.
- D. It eliminates the need for zoning of the SAN fabric in a duplex controller configuration.
Answer: C
NEW QUESTION 108
An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails.
In this scenario, what should the administrator do to satisfy this requirement?
- A. Create the disk pool, and then add another 12 TB drive to the pool
- B. Create the disk pool, and then create a hot spare on another 12 TB disk
- C. Create the disk pool, and then the system automatically reserves 12 TB of space
- D. Create the disk pool, and then edit the pool to reserve 12 TB of space
Answer: B
NEW QUESTION 109
An E-Series customer can find out when a specific volume was deleted by using the ______. (Choose the best answer.)
- A. Major Event Log
- B. Storage Array Profile
- C. Online Help
- D. Recovery Guru
Answer: D
NEW QUESTION 110
Identify this controller.
- A. E5500
- B. E5600
- C. E2700
- D. E5400
Answer: D
NEW QUESTION 111
Review the diagram.
Is this cabling correct or incorrect, and why? (Choose the best answer.)
- A. The cabling is incorrect because it uses the top-down bottom-up cabling method
- B. The cabling is incorrect because each controller goes to only one stack of disk shelves
- C. The cabling is incorrect because the controllers are cabled from the host port.
- D. The cabling is correct for the dual stack cabling method
Answer: D
NEW QUESTION 112
Which support data file provides a description of all the hardware, logical components, and properties of the storage system?
- A. Storage-array-configuration.cfg
- B. Storage-array-profile.txt
- C. Recovery-guru.html
- D. Connection.txt
Answer: B
NEW QUESTION 113
Where can you enter scripts in the SANtricity user interface?
- A. In the AMW on the Setup tab
- B. In the AMW on the Storage & Copy Services tab
- C. In the EMW on the Setup tab
- D. In the EMW on the Devices tab
Answer: D
NEW QUESTION 114
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
- B. Power up A-side power supplies first, then power up all B-side power supplies.
- C. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- D. Power on in any order, since the order does not matter
Answer: A
NEW QUESTION 115
Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)
- A. SANtricity management client
- B. Controller firmware
- C. ESM firmware
- D. Controller NVSRAM
Answer: B
NEW QUESTION 116
An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?
- A. Suspend mirroring operations on the orphan then resume operations
- B. Remove the mirroring relationship on the orphan then re-create the mirroring relationship
- C. Perform a role change on the orphan then re-create the mirroring relationship
- D. Deactive the mirror consistency group that contains the orphan then re-enable the group
Answer: B
NEW QUESTION 117
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)
- A. Real-time performance monitor
- B. Host Mappings tab
- C. Unreadable sectors log
- D. Recovery Guru
Answer: B
NEW QUESTION 118
Which storage manager feature scans the system for issues, reports them, and suggests procedures that will correct the issue?
- A. Event Log
- B. Storage array diagnostics
- C. Recovery guru
- D. Diagmon
- E. Performance monitor
Answer: A
NEW QUESTION 119
What would an E-Series system customer use to determine when a specific volume was deleted?
- A. Event Log
- B. Storage Array Profile
- C. Online Help
- D. Recovery Guru
Answer: A
NEW QUESTION 120
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use DM-MP for SAS and LVM for FC.
- B. Use DM-MP for FC and LVM for SAS.
- C. Use LVM for FC and SAS.
- D. Use DM-MP for FC and SAS.
Answer: D
NEW QUESTION 121
A customer intends to use an E2812 system without expansion shelves. The specification for their Windows host requires that six E-Series data volumes be used.
In this scenario, how should the system be configured?
- A. one DDP for each volume
- B. one DDP with all the volumes
- C. three DDPs with the volumes divided equally
- D. two DDPs with the volumes divided equally
Answer: B
NEW QUESTION 122
......
NS0-516 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.lead2passed.com/NetworkAppliance/NS0-516-practice-exam-dumps.html
Best Quality Network Appliance NS0-516 Exam Questions: https://drive.google.com/open?id=1bY-nC9VzU4trxNjN3ZtW6_Kf6rkp4Mar
