Attested 4A0-C01 Dumps PDF Resource [2022]
Latest 4A0-C01 Actual Free Exam Questions Updated 850 Questions
How to book Nokia 4a0-c01 Exam
The registration for the Nokia 4a0-c01 Exam follows the steps given below.
Step 1: Visit to Pearson Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Nokia 4a0-c01 Certifications Exam Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 375
Click on the exhibit.
If the primary path fails, which backup LSP path will the head-end router pick first?
- A. The Standby with the highest next-hop IP.
- B. The first Standby in the list.
- C. The Standby with the lowest next-hop IP.
- D. The Standby with the longest uptime.
Answer: D
NEW QUESTION 376
How are IS-IS LSPs sent on point-to-point links?
- A. None of the above.
- B. They are sent using a unicast address.
- C. They are sent using multicast MAC addresses 0180:c200:0015.
- D. They are sent using multicast MAC addresses 0180:0200:0014.
Answer: B
NEW QUESTION 377
Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the network behind router R2?
- A. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
- B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
- C. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
- D. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
Answer: B
NEW QUESTION 378
Which of the following commands is used to configure the encapsulation type of an Ethernet port?
- A. configure service port port-id ethemetencap-typedot1q|null|qinq create
- B. configure ethernetencap-typedot1q|null|qinq port port-id
- C. configure service service-id Ethernet encap-type dot1q|null|qinq create
- D. configure port port-id Ethernet encap-type dot1q|null|qmq
Answer: D
NEW QUESTION 379
What command will show the OSPF neighbors, and their status on the Alcatel-Lucent 7750 SR?
- A. Show router ospf adjacency
- B. Show ospf adjacency
- C. Show router ospf neighbors
- D. Show ospf neighbors
Answer: C
NEW QUESTION 380
An Alcatel-Lucent 7750 SR has a port with the MAC address of 00;03:FA:AC:77: AF. The port is bound to an interface.
If IPv6 is then enabled on that interface .what will the link-local address be?
- A. 2000::203:FAFFFEAC:77AF/64
- B. FC00::203:FAFF:FEAC:77AF/64
- C. FE80::3FAFF:FEAC:77AF/64
- D. FC00::3:FAFF:FEAC:77AF/64
- E. FE80::203:FAFF:FEAC:77AF/64
Answer: E
NEW QUESTION 381
Click on the exhibit.
What type of OSPFv3 LSA is shown?
- A. Router LSA
- B. Network LSA
- C. Inter-Area Prefix LSA
- D. Link LSA
Answer: B
NEW QUESTION 382
An operator configures an Alcatel-Lucent 7750 SR with a loopback interface and IPv6 address. The operator then configures a routing policy to redistribute the loopback prefix into OSPFv3.
What type of LSA is used to advertise the route to other OSPFv3 routers in the same area?
- A. AS External LSA
- B. Router LSA
- C. Network LSA
- D. Inter-Area Prefix LSA
- E. None of the statements are correct.
- F. Intra-Area Prefix LSA
Answer: A
NEW QUESTION 383
Which of the following SAPs can be used so that only untagged frames and frames with a VLAN tag of 0 are accepted?
- A. sap 1/1/1:*
- B. requires both sap 1/1/1:0 and sap 1/1/1:*
- C. sap 1/1/1:0
- D. sap 1/1/1:0-4096
Answer: C
NEW QUESTION 384
Which of the following devices can originate an opaque LSA?
- A. ABR only
- B. TE enabled OSPF routers
- C. ASBR only
- D. Backbone router only
Answer: B
NEW QUESTION 385
When configuring a filter, where should the most explicit entries be placed?
- A. At the bottom
- B. At the top
- C. In the middle
- D. It does not matter where they are placed.
Answer: B
NEW QUESTION 386
A service can be either local or distributed.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 387
Click on the exhibit.
All ports in the network are operationally up and have a speed of 1Gbps.
Which of the following is TRUE?
- A. The OSPF adjacency between router R1 and router R3 is operationally up.
- B. The system interface of routers R1 and R3 must be included into OSPF for traffic to flow between the 192.168.1.0/24 and 192.168.3.0/24 networks.
- C. Data traffic from network 192.168 3.0/24 to 192.168.1.0/24 will be forwarded from router R3 directly to router R1.
- D. Data traffic from network 192.168.1.0/24 to 192.168.3.0/24 will be forwarded through router R2.
Answer: A
NEW QUESTION 388
Which of the following statements is NOT a valid reason to use MP-BGP as a routing protocol to transport VPRN routes?
- A. The number of VPRN routes can become very large. MP-BGP can support a very large number of routes.
- B. MP-BGP can carry additional information attached to a route as an optional BGP attribute.
- C. All of the above statements are valid reasons for using MP-BGP as a VPRN routing protocol.
- D. MP-BGP can carry routing information for a number of different address families.
- E. MP-BGP is designed to exchange information between routers that are not directly connected. This feature keeps VPRN routing information out of P-routers.
Answer: C
NEW QUESTION 389
At what point is the LSP SRM flag cleared when an LSP is sent on an IS-IS point-to-point link? Choose two answers.
- A. When an acknowledgment is received in the form of PSNP.
- B. As soon as the LSP is transmitted.
- C. Only when a newer LSP is received
- D. When a newer or same aged LSP is received.
- E. When an older LSP is received.
Answer: A,D
NEW QUESTION 390
Which of the following correctly lists the 5 OSPF packet types?
- A. Hello, link state update, link state request, link state acknowledgement, database description.
- B. Hello, link state refresh, link state update, link state acknowledgement, link state authentication.
- C. Link state update, link state refresh, link state acknowledgement, database description, notification.
- D. Hello, link state update, link state packet, link State acknowledgement, database description.
Answer: A
NEW QUESTION 391
A service provider wishes to configure a Layer 2 service that will forward customer VLAN tags.
When configuring an SDP for the service, which vc-type will forward service delimiting tags on the ingress PE?
- A. vc-type vlan
- B. vc-type null
- C. vc-type ether
- D. vc-type dot1q
Answer: A
NEW QUESTION 392
How many bytes make up the system ID in an IS-IS NSAP address on the Alcatel-Lucent 7750 SR?
- A. Variably between 4 and 8 bytes
- B. 8 bytes
- C. 6 bytes
- D. 4 bytes
Answer: C
NEW QUESTION 393
What command will show the IS-IS neighbors, and their status on an Alcatel-Lucent 7750 SR?
- A. Show router isis neighbors
- B. Show isis adjacency
- C. Show isis neighbors
- D. Show router isis adjacency
Answer: D
NEW QUESTION 394
Click on the exhibit.
What is the correct command to configure a default route on the Alcatel-Lucent 7750SR R2?
- A. config> static-route 0.0.0.0/0 next-hop 10.1.2.2
- B. config>router> static-route 0.0.0.0/0 next-hop 10.1.2.1
- C. config>router> static-route 0.0.0.0/0 next-hop 10.1.2.2
- D. config>router> static-route 0.0.0.0 255.255.255.255 next-hop 10.1.2.1
Answer: B
NEW QUESTION 395
Which of the following statements regarding RSVP path messages on an Alcatel-Lucent SR is true?
- A. The IP header HOP object reflects the upstream router's egress interface address.
- B. The IP header source address is the sender's egress interface address.
- C. The IP header destination address is the next-hop interface address.
- D. The path message's IP header options field sets the router alert option.
Answer: D
NEW QUESTION 396
......
4A0-C01 Certification Overview Latest 4A0-C01 PDF Dumps: https://www.lead2passed.com/Nokia/4A0-C01-practice-exam-dumps.html
