Certification Training for CQE Exam Dumps Test Engine [2021]
Oct 19, 2021 Step by Step Guide to Prepare for CQE Exam
NEW QUESTION 40
What distribution is used to determine the OC curve for an attributes sampling plan?
- A. The binomial or the hypergeometric distribution.
- B. Binomial.
- C. Exponential.
- D. Normal.
Answer: A
NEW QUESTION 41
Given the data below is normally distributed, and the population standard deviation is 3.1, what is the 90% confidence interval for the mean?
22, 23, 19, 17, 29, 25
- A. 20.88 - 24.12
- B. 20.42 - 24.59
- C. 17.4 - 27.6
- D. 21.65 - 23.35
Answer: B
NEW QUESTION 42
Which of the following would be the MOST important considerations when establishing inspection points within a production operation?
I. Inspection to prevent defects from entering the system.
II. Inspection after all operations (both manual and automated).
III. Inspection prior to a painting or masking operation.
- A. I and III only
- B. I and II only
- C. I only
- D. I, II and III
Answer: A
NEW QUESTION 43
What distribution is used to determine the OC curve for an attributes sampling plan?
- A. The binomial or the hypergeometric distribution.
- B. Binomial.
- C. Exponential.
- D. Normal.
Answer: A
NEW QUESTION 44
Which of the following is the BEST statement to make regarding the relationship between product precision and product production?
- A. With too little precision, production costs increase.
- B. With too much precision, production costs increase.
- C. With little precision, performance will improve.
- D. Precision costs and performance are related.
Answer: D
NEW QUESTION 45
The primary advantage of the Latin square design, compared to the factorial design, is that
- A. It allows higher significance levels.
- B. It eliminates the need for interaction analysis.
- C. In most circumstances, it requires less data.
- D. It does not require homogeneity of variance.
Answer: C
NEW QUESTION 46
The distribution of a characteristic is negatively skewed. The sampling distribution of the mean for large samples is:
- A. Lognormal.
- B. Negatively skewed.
- C. Positively skewed.
- D. Approximately normal.
Answer: D
NEW QUESTION 47
Benchmarking might be defined as any of the following EXCEPT:
- A. A process for rigorously measuring your performance versus the best-in-class companies.
- B. Comparing the performance of one company to a set of standards and then to another'sperformance.
- C. The search for best industry practices that lead to superior performance.
- D. A standard of excellence or achievement against which other similar things must be measured orjudged.
Answer: B
NEW QUESTION 48
An X-bar and R chart with n=5 has been plotted for some time and has demonstrated random variation.
Upon review of the last 30 plot points, the expected number of runs around the centerline on the X-bar chart is expected to be approximately which of the following?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 49
In the planning of a new major manufacturing program, the greatest quality effort should be put logically in
- A. Prevention of occurrence of substandard quality.
- B. Inspection of product.
- C. Nonconformance to specifications.
- D. Nondestructive testing equipment.
Answer: A
NEW QUESTION 50
In obtaining Total Customer Satisfaction, management should NOT undertake which of the following activities?
- A. Encourage sacrificing for the team.
- B. Encourage team competition.
- C. Coordinate efforts of the departments.
- D. Use employee involvement and teamwork.
Answer: B
NEW QUESTION 51
The weight of paint cans is considered
- A. Random data.
- B. Continuous data.
- C. Discrete data.
- D. Probability data.
Answer: B
NEW QUESTION 52
A vendor may be audited both before and during the execution of a contract. During such a vendor
audit, the focus may be directed at the management and resource management of the company. Which of the following areas would be EXCLUDED during such an audit?
- A. Design and process capabilities.
- B. Defined quality responsibilities.
- C. Company philosophy and organizational charts.
- D. Use and planning of time, manpower and training.
Answer: A
NEW QUESTION 53
According to Tchebysheff's theorem what % of measurements must lie within 2.5 standard deviations of the mean?
- A. 0.840
- B. 0.625
- C. 3/4
- D. 8/9
Answer: A
NEW QUESTION 54
When using a control chart, a point plotting within the limits on the chart is
- A. The equivalent of type II error.
- B. The equivalent of accepting the hypothesis that the process is in control.
- C. The equivalent of not rejecting the hypothesis that the process is in control.
- D. The equivalent of type I error.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 55
When asked to make recommendations on how to correct any deficiencies noted in the exit report, the auditor(s) should
- A. Avoid a recommendation in writing but help the auditee of possible.
- B. Confer with the client first.
- C. Offer no specific advice and few suggestions.
- D. Make the best recommendation possible.
Answer: C
NEW QUESTION 56
To be effective, a corrective and preventive action system must have
- A. Approved of the QC department.
- B. A material review board.
- C. A method for identifying nonconformities.
- D. Top management support.
Answer: C
NEW QUESTION 57
The primary reason that nonconforming material should be identified and segregated is
- A. So that responsibility can be determined and disciplinary action taken.
- B. So that the cause of nonconformity can be determined.
- C. So it cannot be used in production without proper authorization.
- D. To obtain samples of poor workmanship for use in the company's training program.
Answer: C
NEW QUESTION 58
The Shewhart or Deming cycle is often referred to as
- A. The cause and effect diagram.
- B. Plan-do-check-act.
- C. The affinity diagram.
- D. Problem solving flow chart.
Answer: B
NEW QUESTION 59
What does a corrective action do to prevent an existing noncomformity, defect or undesirable situation from recurring?
- A. Takes action against it.
- B. Minimizes it.
- C. Takes repercussions against those responsible.
- D. Eliminates it.
Answer: D
NEW QUESTION 60
......
Ultimate Guide to Prepare CQE Certification Exam for ASQ Certification: https://www.lead2passed.com/ASQ/CQE-practice-exam-dumps.html
ASQ Certification CQE Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=15tOMfiJCJ58GZN7w-Cg7p1l69VrKgKYx
